User's Manual

WavePro™ WP201 Access Point: User Manual
Log window
Control Area Control Title Control Description
System Log area Log Type list
box
Click the Log Type list box arrow and select the type of
information to log.
Note: The list is in the SNMP importance order on the
WP201-100.
Alphabetically, the options are:
l Alert
l All (the default)
l Critical
l Debug
l Emergency
l Error
l Information
l Notice
l Warning
System Log area Refresh button Click the Refresh button to clear the Log scroll box and start a
new log with the specific information designated by the
selection made in the Log Type list box.
System Log area Clear button Click the Clear button to erase the existing log information and
start recording new log information.
System Log area Log Results
scroll box
The Results scroll box shows the log results as they occur in
the WP201-100.
Remote Log area Enable or
Disable option
buttons
Click the Remote Log Enable button to activate the Remote
Log service for the WP201-100.
Remote Log area Log Server IP
Address text
box
In the Log Server IP Address text box, enter the IP address of
the log server.
Apply button Click Apply to save the changes.
LUM0073AA Rev Feb-2017 Page 176 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT