User's Manual
Table Of Contents
- Preface
- 1. WP201-100 Overview
- 2. Installation and Setup
- 3. Configuring the WP201-100
- 4. Testing and Discovery
- 5. Backup, Restore, and Upgrade the WP201-100
- 5.1. Reset tab Procedures
- 5.2. Firmware window Procedures
- 5.3. Reboot the WP201-100
- 5.4. Restore the WP201-100 Factory Defaults
- 5.5. Restore to User Defaults
- 5.6. Backup WP201-100 Factory Settings
- 5.7. Backup the WP201-100 User Settings as the Default
- 5.8. Reset to the WP201-100 Defaults
- 5.9. Restore the WP201-100 to Factory New Settings
- 5.10. Restore the WP201-100 to the User Default
- 5.11. Upgrade the WP201-100 Firmware
- 6. Viewing Information
- 7. Administration
- 7.1. Changing the WP201-100 Account Password
- 7.2. Fast Roaming Activation
- 7.3. Guest Network Settings - Activate and Define
- 7.4. Define a Guest Network Security Mode
- 7.5. Define a WPA-Enterprise Security Mode
- 7.6. Define a WPA-PSK Security Mode
- 7.7. Email Alert - Activate and Define
- 7.8. Reboot Schedule - Activate and Define
- 7.9. Remote Log Activation
- 7.10. Set the WP201-100 Time
- 7.11. Setup IPv4 Static IP Settings
- 7.12. Setup of IPv6 Settings
- 7.13. SNMP Settings - Activate and Define
- 7.14. Spanning Tree Settings - Activate and Define
- 7.15. SSH and HTTPS Settings Activation
- 7.16. WiFi Scheduler - Activate and Define
- 7.17. Wireless MAC Filter - Activate and Define
- 7.18. Wireless Traffic Shaping - Activate and Define
- 7.19. Canceling Unsaved Changes in the WP201-100
- 8. Examples of WP201-100 Networks
- 9. WP201-100 Software Environment
- 9.1. WP201-100 Window Components
- 9.2. Account window
- 9.3. Advanced window
- 9.4. Basic window
- 9.5. Connections window
- 9.6. Device Status window
- 9.7. Firmware window
- 9.8. Log window
- 9.9. Reboot or Restore window
- 9.10. Site Survey window
- 9.11. Time Zone window
- 9.12. Tools window
- 9.13. Unsaved window
- 9.14. WiFi Scheduler window
- 9.15. Wireless window
- 9.15.1. Wireless Settings area
- 9.15.2. Operation Mode area
- 9.15.3. Wireless Settings area
- 9.15.4. Wireless Settings area - Operation Mode = WDS Station
- 9.15.5. Mesh and Mesh Advanced Settings areas
- 9.15.6. WDS Link Settings area
- 9.15.7. Guest Network Settings area
- 9.15.8. Fast Handover, Management VLAN Settings, and Cross Band VLAN Pass Through areas
- 9.16. Wireless Edit dialog box
- 9.17. Wireless Edit dialog box - WDS Station Mode
- 9.18. Wireless Edit dialog box - Guest Network
- 9.19. Microsoft® Enter name of file to save to dialog box
- 9.20. Microsoft® File Upload dialog box
- 9.21. Microsoft® Opening Backup dialog box
- 10. WP201-100 CLI List
- 11. WP201-100 Factory Defaults
- 12. WP201-100 Release Notes
- 13. WaveProWP201-100 IP Address Recovery
- Appendix A: WP201-100 Technical Specifications
- Appendix B: WP201-100 Available Accessories
- Appendix C: FreeWave Legal Information
Appendix A: WP201-100 Technical Specifications
Page 257 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
WP201-100 Technical Specifications
Specification Description
RF Frequency Support l 2.4GHz, 802.11b/g/n (to a maximum of 450Mbps)
l 2.41 to 2.47 GHz (ITU ISM band)
l Europe and Japan product covering 2.400 to 2.484 GHz
l Programmable for different country regulations
l Maximum of 450 Mbps per radio
l 5GHz, 802.11a/n/ac (to a maximum of 1300Mbps)
l 5.15 to 5.825 GHz (U-NII & ISM bands)
l 802.11a/n/ac 4.9GHz
l 5.150 - 5.250 GHz
l 5.250 - 5.350 GHz
l 5.470 - 5.725 GHz
l 5.725 - 5.850 GHz with DFS
l Maximum of 1.3 Gbps
RF Modulation
Technology
OFDM:
l BPSK
l QPSK
l 16-QAM
l 64-QAM with Adaptive Link
Over the Air Security l WPA, WPA2, WPA-Enterprise
l AES - 128, 802.11i
Error Correction l ARQ
l FEC
SSID 8 SSIDs per radio
RF Interface 6 N-type Connectors
Antennas 6 External N-type Antennas
l 3 x detachable 5 dBi 2.4GHz omni-directional, Dipole antennas
l 3 x detachable 7 dBi 5GHz omni-directional, Dipole antennas
Wired Interfaces
Network Interface l PoE+, 802.3at (PD, LAN1 Port)
l PoE, 802.3af (PSE, LAN2 Port)
l 2 - RJ45 for 10/100/1000 Gigabit Ethernet 802.3ab port with PoE
support
l 2 802.3ab (GigE) LAN Ports:
l 1 - LAN 1 Port - PoE Input
l 1 - LAN 2 Port - PSE Output
DRAFT