User's Manual
Table Of Contents
- Preface
- 1. WP201-100 Overview
- 2. Installation and Setup
- 3. Configuring the WP201-100
- 4. Testing and Discovery
- 5. Backup, Restore, and Upgrade the WP201-100
- 5.1. Reset tab Procedures
- 5.2. Firmware window Procedures
- 5.3. Reboot the WP201-100
- 5.4. Restore the WP201-100 Factory Defaults
- 5.5. Restore to User Defaults
- 5.6. Backup WP201-100 Factory Settings
- 5.7. Backup the WP201-100 User Settings as the Default
- 5.8. Reset to the WP201-100 Defaults
- 5.9. Restore the WP201-100 to Factory New Settings
- 5.10. Restore the WP201-100 to the User Default
- 5.11. Upgrade the WP201-100 Firmware
- 6. Viewing Information
- 7. Administration
- 7.1. Changing the WP201-100 Account Password
- 7.2. Fast Roaming Activation
- 7.3. Guest Network Settings - Activate and Define
- 7.4. Define a Guest Network Security Mode
- 7.5. Define a WPA-Enterprise Security Mode
- 7.6. Define a WPA-PSK Security Mode
- 7.7. Email Alert - Activate and Define
- 7.8. Reboot Schedule - Activate and Define
- 7.9. Remote Log Activation
- 7.10. Set the WP201-100 Time
- 7.11. Setup IPv4 Static IP Settings
- 7.12. Setup of IPv6 Settings
- 7.13. SNMP Settings - Activate and Define
- 7.14. Spanning Tree Settings - Activate and Define
- 7.15. SSH and HTTPS Settings Activation
- 7.16. WiFi Scheduler - Activate and Define
- 7.17. Wireless MAC Filter - Activate and Define
- 7.18. Wireless Traffic Shaping - Activate and Define
- 7.19. Canceling Unsaved Changes in the WP201-100
- 8. Examples of WP201-100 Networks
- 9. WP201-100 Software Environment
- 9.1. WP201-100 Window Components
- 9.2. Account window
- 9.3. Advanced window
- 9.4. Basic window
- 9.5. Connections window
- 9.6. Device Status window
- 9.7. Firmware window
- 9.8. Log window
- 9.9. Reboot or Restore window
- 9.10. Site Survey window
- 9.11. Time Zone window
- 9.12. Tools window
- 9.13. Unsaved window
- 9.14. WiFi Scheduler window
- 9.15. Wireless window
- 9.15.1. Wireless Settings area
- 9.15.2. Operation Mode area
- 9.15.3. Wireless Settings area
- 9.15.4. Wireless Settings area - Operation Mode = WDS Station
- 9.15.5. Mesh and Mesh Advanced Settings areas
- 9.15.6. WDS Link Settings area
- 9.15.7. Guest Network Settings area
- 9.15.8. Fast Handover, Management VLAN Settings, and Cross Band VLAN Pass Through areas
- 9.16. Wireless Edit dialog box
- 9.17. Wireless Edit dialog box - WDS Station Mode
- 9.18. Wireless Edit dialog box - Guest Network
- 9.19. Microsoft® Enter name of file to save to dialog box
- 9.20. Microsoft® File Upload dialog box
- 9.21. Microsoft® Opening Backup dialog box
- 10. WP201-100 CLI List
- 11. WP201-100 Factory Defaults
- 12. WP201-100 Release Notes
- 13. WaveProWP201-100 IP Address Recovery
- Appendix A: WP201-100 Technical Specifications
- Appendix B: WP201-100 Available Accessories
- Appendix C: FreeWave Legal Information
Page 4 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
5.7. Backup the WP201-100 User Settings as the Default 78
5.8. Reset to the WP201-100 Defaults 79
5.9. Restore the WP201-100 to Factory New Settings 81
5.10. Restore the WP201-100 to the User Default 83
5.11. Upgrade the WP201-100 Firmware 84
5.11.1. Download the Upgrade File 84
5.11.2. Install the Upgrade File 87
6. Viewing Information 90
6.1. Scanning for Access Points 91
6.2. View the WP201-100 Log Information 92
6.3. Viewing WP201-100 Connection Information 93
6.4. View the WP201-100 Device Status 94
7. Administration 95
7.1. Changing the WP201-100 Account Password 96
7.2. Fast Roaming Activation 97
7.3. Guest Network Settings - Activate and Define 100
7.4. Define a Guest Network Security Mode 102
7.5. Define a WPA-Enterprise Security Mode 105
7.6. Define a WPA-PSK Security Mode 107
7.7. Email Alert - Activate and Define 109
7.8. Reboot Schedule - Activate and Define 111
7.9. Remote Log Activation 113
7.10. Set the WP201-100 Time 114
7.10.1. Manually Set the Date and Time 114
7.10.2. Automatically Set the Date and Time 115
7.10.3. Set the WP201-100 Time Zone 115
7.11. Setup IPv4 Static IP Settings 117
7.12. Setup of IPv6 Settings 119
7.13. SNMP Settings - Activate and Define 121
7.14. Spanning Tree Settings - Activate and Define 123
7.15. SSH and HTTPS Settings Activation 125
7.16. WiFi Scheduler - Activate and Define 126
7.17. Wireless MAC Filter - Activate and Define 128
7.18. Wireless Traffic Shaping - Activate and Define 130
7.19. Canceling Unsaved Changes in the WP201-100 132
8. Examples of WP201-100 Networks 133
8.1. Access Point Mode 134
8.2. Mesh-AP Mode 135
8.3. Mesh-Only Mode 136
8.4. Wireless Distribution System (WDS) - AP Mode 137
DRAFT