User's Manual

WavePro™ WP201 Access Point: User Manual
The lower the data rate selected, the lower the throughput.
Transmission distance may be increased.
h. If applicable, select the Enable option button to activate the Client Limit restriction in
the WP201-100.
i. in the Client Limit text box, enter the maximum number of clients allowed to connect to
the WP201-100.
j. Select the Aggregation - Disable option button to NOT use the Aggregation area.
k. In the RTS/CTS Threshold text box, enter the threshold package size for RTS/CTS.
Important!: The RTS/CTS Threshold text box is not available for 5GHz WP201-100
WDS networks.
l. In the Distance text box, enter the distance between the WP201-100 Access Points
and clients.
m. Click the AP Detection Scan button to open the Site Survey window (on page 178)
showing the nearby Access Points.
9. Scroll to the Wireless Settings area.
Note: See the description of the Wireless Settings area (on page 197) for detailed information
about the options in this area.
Figure 50: Wireless window - Wireless Settings area - 2.4GHz and 5GHz
10. In the Wireless Settings area:
a. Select the Enable check box to activate an SSID profile.
b. In the SSID text box, enter a descriptive SSID name for the current WP201-100 profile.
c. Optional: Click the Edit button to open the Wireless Edit dialog box (on page 208) and
select the appropriate security for the WP201-100.
LUM0073AA Rev Feb-2017 Page 50 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT