User's Manual
Table Of Contents
- Preface
- 1. WP201-100 Overview
- 2. Installation and Setup
- 3. Configuring the WP201-100
- 4. Testing and Discovery
- 5. Backup, Restore, and Upgrade the WP201-100
- 5.1. Reset tab Procedures
- 5.2. Firmware window Procedures
- 5.3. Reboot the WP201-100
- 5.4. Restore the WP201-100 Factory Defaults
- 5.5. Restore to User Defaults
- 5.6. Backup WP201-100 Factory Settings
- 5.7. Backup the WP201-100 User Settings as the Default
- 5.8. Reset to the WP201-100 Defaults
- 5.9. Restore the WP201-100 to Factory New Settings
- 5.10. Restore the WP201-100 to the User Default
- 5.11. Upgrade the WP201-100 Firmware
- 6. Viewing Information
- 7. Administration
- 7.1. Changing the WP201-100 Account Password
- 7.2. Fast Roaming Activation
- 7.3. Guest Network Settings - Activate and Define
- 7.4. Define a Guest Network Security Mode
- 7.5. Define a WPA-Enterprise Security Mode
- 7.6. Define a WPA-PSK Security Mode
- 7.7. Email Alert - Activate and Define
- 7.8. Reboot Schedule - Activate and Define
- 7.9. Remote Log Activation
- 7.10. Set the WP201-100 Time
- 7.11. Setup IPv4 Static IP Settings
- 7.12. Setup of IPv6 Settings
- 7.13. SNMP Settings - Activate and Define
- 7.14. Spanning Tree Settings - Activate and Define
- 7.15. SSH and HTTPS Settings Activation
- 7.16. WiFi Scheduler - Activate and Define
- 7.17. Wireless MAC Filter - Activate and Define
- 7.18. Wireless Traffic Shaping - Activate and Define
- 7.19. Canceling Unsaved Changes in the WP201-100
- 8. Examples of WP201-100 Networks
- 9. WP201-100 Software Environment
- 9.1. WP201-100 Window Components
- 9.2. Account window
- 9.3. Advanced window
- 9.4. Basic window
- 9.5. Connections window
- 9.6. Device Status window
- 9.7. Firmware window
- 9.8. Log window
- 9.9. Reboot or Restore window
- 9.10. Site Survey window
- 9.11. Time Zone window
- 9.12. Tools window
- 9.13. Unsaved window
- 9.14. WiFi Scheduler window
- 9.15. Wireless window
- 9.15.1. Wireless Settings area
- 9.15.2. Operation Mode area
- 9.15.3. Wireless Settings area
- 9.15.4. Wireless Settings area - Operation Mode = WDS Station
- 9.15.5. Mesh and Mesh Advanced Settings areas
- 9.15.6. WDS Link Settings area
- 9.15.7. Guest Network Settings area
- 9.15.8. Fast Handover, Management VLAN Settings, and Cross Band VLAN Pass Through areas
- 9.16. Wireless Edit dialog box
- 9.17. Wireless Edit dialog box - WDS Station Mode
- 9.18. Wireless Edit dialog box - Guest Network
- 9.19. Microsoft® Enter name of file to save to dialog box
- 9.20. Microsoft® File Upload dialog box
- 9.21. Microsoft® Opening Backup dialog box
- 10. WP201-100 CLI List
- 11. WP201-100 Factory Defaults
- 12. WP201-100 Release Notes
- 13. WaveProWP201-100 IP Address Recovery
- Appendix A: WP201-100 Technical Specifications
- Appendix B: WP201-100 Available Accessories
- Appendix C: FreeWave Legal Information
Page 6 of 267 LUM0073AA Rev Feb-2017
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
9.13. Unsaved window 186
9.14. WiFi Scheduler window 187
9.14.1. Auto Reboot Settings area 188
9.14.2. WiFi Scheduler area 189
9.15. Wireless window 191
9.15.1. Wireless Settings area 192
9.15.2. Operation Mode area 193
9.15.3. Wireless Settings area 197
9.15.4. Wireless Settings area - Operation Mode = WDS Station 199
9.15.5. Mesh and Mesh Advanced Settings areas 200
9.15.6. WDS Link Settings area 202
WDS Link Settings area for WDS Bridge with WEP Security 203
9.15.7. Guest Network Settings area 204
9.15.8. Fast Handover, Management VLAN Settings, and Cross Band VLAN Pass Through areas 206
9.16. Wireless Edit dialog box 208
9.16.1. Wireless Security area 209
Security Mode = WEP 209
Security Mode = WPA-PSK 209
Security Mode = WPA-Enterprise 211
9.16.2. Fast Roaming area 213
9.16.3. Wireless MAC Filter area 214
9.16.4. Wireless Traffic Shaping area 215
9.17. Wireless Edit dialog box - WDS Station Mode 216
Operation Mode = WDS Station / Security Mode = WEP 216
Operation Mode = WDS Station / Security Mode = WPA(2)-PSK 216
Operation Mode = WDS Station / Security Mode = WPA(2)-Enterprise 218
9.18. Wireless Edit dialog box - Guest Network 220
9.19. Microsoft® Enter name of file to save to dialog box 222
9.20. Microsoft® File Upload dialog box 223
9.21. Microsoft® Opening Backup dialog box 224
10. WP201-100 CLI List 225
10.1. Primary Commands 225
10.2. Status Commands 226
10.3. System Commands 227
10.4. 2.4GHz Wireless Commands 228
10.5. 5GHz Wireless Commands 231
10.6. WP201-100 Management Commands 234
11. WP201-100 Factory Defaults 239
11.1. Account Settings 240
11.2. Firmware Upgrade Settings 240
DRAFT