User's Manual

WavePro™ WP201 Access Point: User Manual
7. Administration
This section provides procedure information about administering the WP201-100 settings.
l Changing the WP201-100 Account Password (on page 96).
l Fast Roaming Activation (on page 97).
l Guest Network Settings - Activate and Define (on page 100).
l Define a Guest Network Security Mode (on page 102).
l Define a WPA-Enterprise Security Mode (on page 105).
l Define a WPA-PSK Security Mode (on page 107).
l Email Alert - Activate and Define (on page 109).
l Reboot Schedule - Activate and Define (on page 111).
l Remote Log Activation (on page 113).
l Set the WP201-100 Time (on page 114).
l Setup IPv4 Static IP Settings (on page 117).
l Setup of IPv6 Settings (on page 119).
l SNMP Settings - Activate and Define (on page 121).
l Spanning Tree Settings - Activate and Define (on page 123).
l SSH and HTTPS Settings Activation (on page 125).
l WiFi Scheduler - Activate and Define (on page 126).
l Wireless MAC Filter - Activate and Define (on page 128).
l Wireless Traffic Shaping - Activate and Define (on page 130).
l Canceling Unsaved Changes in the WP201-100 (on page 132).
LUM0073AA Rev Feb-2017 Page 95 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT