Installation Guide
Table Of Contents
16
Equipment Needed
• Forklift (5,000lb capacity minimum) or crane (5,000lb capacity minimum) with nylon lifting straps and
four-point lifting sling
• Forklift tyne extensions (as required)
• 15/16” wrench and socket
• #2 Phillips screwdriver
• T27 tamper proof pin-in Torx driver and bit
• 15/16” Crows foot wrench
• Torque wrench (200 ft-lbs)
• Torque wrench (100 in-lbs)
• 2 AWG lug (grounding the service wire and earth ground)
• Zip ties (as necessary)
• Standard electrical equipment such as wire cutter, wire stripper, cable ties, conduit seal, etc.
• Band cutter
1 OVERVIEW