Installation Guide

6
BEFORE YOU START
This guide contains important instructions that must be followed to ensure safe installation of the FreeWire
Boost Charger® DC fast charging station. Be sure to complete the steps outlined in the Boost Charger Site
Preparation Guide (770-00004-01) prior to installing the Boost Charger.
SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
Save these instructions, as they contain important information that must be followed during installation or
used for future reference of a FreeWire Boost Charger DC fast charging station.
Grounding instructions
The FreeWire Boost Charger must be grounded. Use a grounded, metal, permanent wiring system that runs
with circuit conductors and connects to the charger equipment ground on the Boost Charger. An earth
ground that complies to local codes must also be used for the Boost Charger and be connected to the
equipment grounding terminal or lead on the Electric Vehicle Supply Equipment (EVSE). Connections to the
EVSE shall comply with all applicable codes and ordinances.
Symbols used in this installation guide
WARNING: This indicates a fact or feature very important for the safety of the user to prevent injury
or death and/or which can cause serious hardware damage if not applied appropriately.
CAUTION: Identifies information to prevent damage to this product.
GROUND: Earth ground symbol