Maintenance Manual

2. Using a clean rag, wipe all dirt from the drag link
grease fittings. See Fig. 3.
3. Using a pressure gun and NLGI Grade 2 (8%
12-hydroxy lithium stearate grease) or NLGI
Grade 1 (6% 12-hydroxy lithium stearate grease)
chassis grease, apply clean grease at the grease
fittings until old grease is forced out of the
socket.
f46107210/07/2016
2
1
1. Grease Fitting at Pitman Arm
2. Grease Fitting at Axle Steering Arm
Fig. 3, Drag Link
Steering 46
New Cascadia Maintenance Manual, August 2019 46/3