Maintenance Manual

Fig. 6. Open and close the fifth wheel several
times to further distribute the grease.
Lightly oil other moving parts in the fifth wheel.
4. Apply grease to the top plate. Spread grease all
over the mating surface of the top plate. Be sure
the grease pockets built into the top plates are
full of grease.
Holland FW35
1. Using a water-resistant lithium-base grease,
grease the top plate.
2. Using a light oil (such as SAE 10W or 20W
motor oil), lubricate the cam track and pivot. See
Fig. 7.
3. Grease the yoke tips, locks, and the release
handle and spring; see
Fig. 8. Grease the
mounting bracket supports through the grease
fittings. A “low temp” grade grease rated for
-30°F (-34°C) or lower such as Cato Oil and
Grease #5213, Craftsman Chemical Co. #LTF 2,
Mystic LP-200, or equivalent is recommended.
1. Pull Handle
2. Jaw
3. Wedge
Fig. 6, Fontaine Fifth Wheel
12/03/2010 f311136
1
Use a light oil (such as SAE 10W or 20W motor oil) to
lubricate the cam track and pivot.
1. Cam Plate
Fig. 7, Holland FW35 Fifth Wheel, Oil Lubrication
12/03/2010 f311135
1
2
2
3
3
4
1. Release Handle and
Spring
2. Grease Fitting
3. Yoke Tip
4. Locks
Fig. 8, Holland FW35 Fifth Wheel, Grease Lubrication
Frame and Frame Components31
New Cascadia Maintenance Manual, September 201831/6