OXFORD INSTALLATION GUIDE FRESCO FYMID-IZE012 5 | Mirror Front view Cabinets rear view ALL DIMENSIONS & SPECIFICATIONS ARE APPROXIMATE AND SUBJECT TO CHANGE WITHOUT NOTICE. J) FVN20-123612 OXFORD INSTALLATION GUIDE PAGE 1 ©2017 FRESCA™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
CABINET (X2} CABINET {2} front view back view “ 20 3/8" o> >. 2233/8" ALL DIMENSIONS & SPECIFICATIONS ARE APPROXIMATE AND SUBJECT TO CHANGE WITHOUT NOTICE. © FVN20-123612 OXFORD | INSTALLATION GUIDE PAGE 2 ©2017 FRESCA™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
TOOLS FOR ASSEMBLY ant Alb Level the mirror bracket 2 Drill the holes Insert the anchors inside and then mark the the holes installation position Attach the bracket to the Hang the mirror on the wall with the screws bracket mirror [IEEE] Consult an expert for the proper screws/bolts to use when attaching to various constructions. Screws provided do not attach to all wall construction types. © FVN20-123612 OXFORD | INSTALLATION GUIDE PAGE 3 ©2017 FRESCA™ All rights reserved.
DRAWER REMOVAL & INSTALLATION REMOVAL INSTALLATION Level the cabinet and mark position Drill the holes previously marked. for the installation. wr Consult an expert for the proper screws/bolts to use To ensues stability, cabinet's when attaching to various height can be regulated by wall constructions. Screws turning the glide clockwise provided do not attach to or counterclockwise. A (National Step) all wall construction types.
*Insert the anchors into the holes 4 Connect the cabinet to the wall using screws *NOTE: Only use anchors if stud is not available. "g, eS wr Consult an expert for the proper screws/bolts to use when attaching to various wall constructions. Screws provided do not attach to all wall construction types. Make sure that both cabinets are 6 Flip the counter top upside down and aligned and securely installed. attach the sink to it using a provided brackets & screws.
PAGE 6 to the top of the cabinet and interlope with sink attached on it.
‘Your item may appear slightly different from the illustration. Cc SILICONE WASHER MOUNTING \ § SILICONE RING = WASHER 2 e— ga BRASS NUT RUBBER DRAIN WASHER PIPE TAN, PPE MOUNTING RING 2 Tg RUBBER WASHER 2 BEER WASHER oAR CLEAN GUT a a RUBBER PLUG WASHER 3 POP-UP INSTALLATION anise melee WITHOUT OVERFLOW WITH OVERFLOW © FVN20-123612 OXFORD | INSTALLATION GUIDE ©2017 FRESCA™ All rights reserved.
P-TRAP INSTALLATION Install P-trap (J). © FVN20-123612 OXFORD | INSTALLATION GUIDE ©2017 FRESCA™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.