FVN2436 WINDSOR INSTALLATION GUIDE TOOLS FOR ASSEMBLY QF 1/4" & 3/8" Drill Bit Measure distance between the holes and mark Press the anchors in the holes and insert it on the wall using a level. the screws with a drill or screwdriver. | Verify level and mark the mounting holes. IMPORTANT: Consult an expert for the proper screws/bolts to use when attaching to various constructions. Screws provided do not attach to all wall construction types. Anchors are not required If brackets are installed In stud.
FVN2436 WINDSOR INSTALLATION GUIDE oe PNR Drill holes in the wall and insert the anchors. [2] Mark anchor mounting hole locations on the wall as shown. IMPORTANT: Consult an expert for the proper scrapbooks to use when attaching to various constructions. Screws provided do not attach to all wall construction types. Anchors are not required if brackets are installed in stud. 2 | Flip counter top upside down and attach Apply silicone to the top of the cabinet sink to It using provided brackets & screws.
FVN2436 WINDSOR INSTALLATION GUIDE o Your tem may appear slightly different from the illustration. SILICONE WASHER 2 EY, MOUNTING RING BRASS NUT RING RUBBER WASHER DRAIN PIPE a FIFE MOUNTING RING 2 Lr.
FVN2436 WINDSOR INSTALLATION GUIDE Install tail pipe (G) lag CRE RE] 2] Install p-trap (J) © FVYN2436 WINDSOR | INSTALLATION GUIDE S018 PFRESCA™ Al rights reserved, This malted may not be reproached, displayed, codified or distributed without the express prior written passionless of the copyright holder.
