FVN9S348 ~ ENEMA non INSTALLATION GUIDE FVN9348 FMC8010 Vanity Front Medicine Cabinet Front FVS9348WH Counter Top Front FCB9348 Cabinet Back All dimensions & specifications are approximate and subject to change without notice. { FYN9348 | SENNA | INSTALLATION GUIDE ©2018 FRESCA™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
FVN9S348 ~ ENEMA non INSTALLATION GUIDE TOOLS FOR ASSEMBLY FMC8090 FMC8010 | 39.5” MOUNTING BRACKET (top) MOUNTING BRACKET (bottom) SMALL SCREW INSIDE GLASS SHELF for the loaded weight of the product. Refer to the anchor manufacturer's instructions. electrical wiring or plumbing when mounting this product to the wall. DANGER: ‘WARNING: A Risk of electronic shock. Avoid existing Risk of property damage. Use anchors rated { FYN9348 | SENNA | INSTALLATION GUIDE ©2018 FRESCA™ All rights reserved.
FVN9S348 SENNA INSTALLATION GUIDE FRESCO SURFACE-MOUNT INSTALLATION IMPORTANT: Consult an expert for the proper screws/bolts to use when attaching to various constructions. Screws provided do not attach to all wall construction types. Anchors are not required if brackets are installed in stud.
FVN9S348 ENEMA non INSTALLATION GUIDE RECESS-MOUNT INSTALLATION Draw the perimeter of the Place and hold the medicine Cut the marked perimeter medicine cabinet on the wall. cabinet in the cutout opening. | Frame the cutout opening. with appropriate tool. 4 STEPS TO FRAME THE C T OPENING FMC8090 FMC8010 a. Push a side of the glass shelf b. Snap the glass shelf (C) into left or right pins (J). into the opposite side. «. Fill remaining holes with the plugs (K).
FVN9S348 ~ SENNA INSTALLATION GUIDE FRESCO CABINET INSTALLATION Mark anchor mounting hole locations on wall Drill holes and insert the dowels. as shown. Drill holes in the finished wall as required. Ww 2 IMPORTANT: Consult an expert for the proper screws/bolts to use when attaching to various constructions, Screws provided do not attach to all wall construction types. Anchors are not required if brackets are installed in stud. 3 Apply silicone and install sink.
FVN9S348 ~ ENEMA non INSTALLATION GUIDE DRAWER REMOVAL & INSTALLATION REMOVAL INSTALLATION { FYN9348 | SENNA | INSTALLATION GUIDE ©2018 FRESCA™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
FVN9S348 ~ ENEMA non INSTALLATION GUIDE P-TRAP AND POP-UP INSTALLATION INSTRUCTIONS Your item may appear slightly different from the illustration. €3 MOUNTING RING e— nn BRASS NUT RING Ld RUBBER WASHER DRAIN PIPE TAIL PIPE MOUNTING RING 2 oe TT— RUBBER WASHER 2 RUBBER WASHER a — P-TRAP CLEAN QUT PLUG RUBBER WASHER 3 POP-UP INSTALLATION INSTRUCTIONS WITHOUT OVERFLOW WITH OVERFLOW { FYN9348 | SENNA | INSTALLATION GUIDE ©2018 FRESCA™ All rights reserved.
FVN9S348 ~ ENEMA non INSTALLATION GUIDE P-TRAP INSTALLATION Install tail pipe (G) 2] Install p-trap (J) { FYN9348 | SENNA | INSTALLATION GUIDE ©2018 FRESCA™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
