7). FVN9448 % ENEMA non INSTALLATION GUIDE FVN9448 FMC8010 pr Medicine Cabinet Front / FVS9348WH Counter Top Front FCB9448 FCB9448 Cabinet Front Cabinet Back All dimensions & specifications are approximate and subject to change without notice. { FVN9448 SENNA | INSTALLATION GUIDE ©2018 FRESCA™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
FVNS448 4, ENEMA non INSTALLATION GUIDE TOOLS FOR ASSEMBLY FMC8090 FMC8010 | 39.5” MOUNTING BRACKET (top) MOUNTING BRACKET (bottom) SMALL SCREW #8 x 13/8" Flat Head Screw INSIDE GLASS SHELF for the loaded weight of the product. Refer to the anchor manufacturer's instructions. electrical wiring or plumbing when mounting this product to the wall. DANGER: ‘WARNING: A Risk of electronic shock. Avoid existing Risk of property damage.
FVNS448 SENNA INSTALLATION GUIDE FRESCO SURFACE-MOUNT INSTALLATION IMPORTANT: Consult an expert for the proper screws/bolts to use when attaching to various constructions. Screws provided do not attach to all wall construction types. Anchors are not required if brackets are installed in stud.
FRESCO Draw the perimeter of the Place and hold the medicine Cut the marked perimeter medicine cabinet on the wall. cabinet in the cutout opening. | Frame the cutout opening. with appropriate tool. 4 STEPS TO FRAME THE C T OPENING FMC8090 FMC8010 a. Push a side of the glass shelf b. Snap the glass shelf (C) into left or right pins (J). into the opposite side. «. Fill remaining holes with the plugs (K). This screw allow you to adjust pitch side to side.
FVNS9448 4, SENNA INSTALLATION GUIDE FRESCO CABINET INSTALLATION Mark anchor mounting hole locations on wall Drill holes and insert the dowels. as shown. Drill holes in the finished wall as required. a Ww 2 IMPORTANT: Consult an expert for the proper screws/bolts to use when attaching to various constructions, Screws provided do not attach to all wall construction types. Anchors are not required if brackets are installed in stud. Apply silicone and install sink.
i. FVN9448 © SENNA * INSTALLATION GUIDE FRESCO DRAWER REMOVAL & INSTALLATION INSTALLATION { FVN9448 SENNA | INSTALLATION GUIDE ©2018 FRESCA™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
FVNS9448 4, ENEMA non INSTALLATION GUIDE Your item may appear slightly different from the illustration. €3 MOUNTING RING e— nn BRASS NUT RING Ld RUBBER WASHER DRAIN PIPE TAIL PIPE MOUNTING RING 2 oe TT— RUBBER WASHER 2 RUBBER WASHER a — P-TRAP CLEAN QUT PLUG RUBBER WASHER 3 POP-UP INSTALLATION INSTRUCTIONS WITHOUT OVERFLOW WITH OVERFLOW { FVN9448 SENNA | INSTALLATION GUIDE ©2018 FRESCA™ All rights reserved.
0 INSTALLATION GUIDE FRESCO P-TRAP INSTALLATION Install tail pipe (G) 2] Install p-trap (J) { FVN9448 SENNA | INSTALLATION GUIDE ©2018 FRESCA™ All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder.
