FMC8014/8020 3, MEDICINE CABINET INSTALLATION GUIDE FRESCO TOOLS REQUIRED FOR ASSEMBLY FMC8014 FMC8020 MOUNTING BRACKET (top) Anchor MOUNTING BRACKET (bottom) INSIDE GLASS SHELF electrical wiring or plumbing when for the loaded weight of the product. Refer mounting this product to the wall. i to the anchor manufacturer's instructions. i DANGER: H ‘WARNING: A Risk of electronic shock. Avoid existing Risk of property damage.
SURFACE-MOUNT INSTALLATION Level and mark the 2 Attach bottom bracket (I) to the wall. cabinet’s location on the wall from point a to the point b. IMPORTANT: Consult an expert for the proper | elev and Drill the holes screws/bolts to use when mark. in the wall. attaching to various constructions. Screws provided do not attach to all wall construction types. Anchors are not required if brackets are installed in stud. Insert the Attach bottom anchors In the bracket to the holes.
SURFACE-MOUNT INSTALLATION Attach the side mirrors (C) to Push and twist shelf clips (J). the cabinet with a screwdriver. 9 Insert the shelves (E). Follow the steps below for each shelf. OPTIONAL DOOR ADJUSTMENT a. This screw allow you to adjust pitch side to side. b. This screw releases cabinet’s door and allows up and down adjustment. ¢. This screw allow you to > Push a side of the Snap the shelf (E) adjust the gap between iP shelf (E) into left or down into opposite the doors. right pins (J). side.
RECESS-MOUNT INSTALLATION Determine overall medicine cabinet dimensions. If recessing medicine cabinet, determine rough in dimensions. Cut the perimeter with appropriate tool. 3 . Please consult with a licensed £5 NOTE: contractor for proper medicine cabinet framing. ROUGH IN DIMENSIONS FMC8014 47 1/2" 351/8" 33/4" FMC8020 | 571/4" 351/8" 33/4" LL Frame the cutout opening. Insert the cabinet into the opening. ¢) FMC8014/8020 | INSTALLATION GUIDE ©2018 FRESCA™ All rights reserved.
FMC8014/8020 MEDICINE CABINET INSTALLATION GUIDE FRESCO RECESS-MOUNT INSTALLATION Fill the remaining holes with a plugs (K). Insert the shelves (E). Follow the steps below for each shelf, OPTIONAL DOOR ADJUSTMENT P) This screw releases cabinet's door and allows up and down adjustment. 8.a 8.b Push a side of the Snap the shelf (E) RM This screw allow shelf (E) into left or down into opposite This screw allow you you to adjust pitch i side. to adjust the gap (8 side to side. shelf clips (9. batten the doors.
