Instructions / Assembly

©2014 Fresca ™ All rights reserved. This material may not be reproduced, displayed, modi•ed or distributed without the express prior written permission of the copyright holder.
PAGE 5
Put on the tank cover(C) gently.
a
Test the flush mechanism.
b
5. Put on the tank cover and test the flush mechanism
6. Mount the toilet seat
Replace a new toilet seat please refer to below illustrated.
Insert the expansion rubbers(N) into the
installation hole.
Put the plastic gaskets(L) and bolts(K) onto
the hinge base making them aligned with the
hole of bulgy rubber and fasten it(Do not
over-tighten).
Align the toilet seat(B) with the water closet
pan,then fasten the bolts.
Put on the hinge cover(M).
d
c
b
a
Replace a new toilet seat(B), and repeat the
installation process.
c
Take off the hinge cover(M).
Unscrew the bolts(K).
b
a
C
B
B
N
M
L
L
L
K
K
K
M
M