Installation Instructions

INSTALLATION

INSTRUCTIONS

●

We recommend that this product is installed by a qualified professional contractor.

●

Please check this product immediately to ensure that it has not been damaged and is complete.

●

Please flush the water system to ensure that no debris or any other impurities can enter the taps.

Turn off water supply before commencing work

● Please read these instructions carefully and keep for future reference.

We do NOT recommend you use any household cleaners to clean the product. Because these cleaners change substance or formula

too frequently. The product should always be cleaned with soapy water and rinsed with clean water and dried with a soft cloth.

Important

Cleaning

Before use: Unscrew the Aerator and allow the water to run freely for 5 minutes. Then screw the filter back in place.

Periodically: Unscrew the Aerator and remove. Rinse it with running water until any loose debris is cleared. Then replace the Aerator

and tighten.

Maintainance

Single-lever faucet

FFT3111CH

Aerator

PAGE 1
INSTALLATION INSTRUCTIONS FFT3111CH Single-lever faucet Important We recommend that this product is installed by a qualified professional contractor. ● Please check this product immediately to ensure that it has not been damaged and is complete. ● Please flush the water system to ensure that no debris or any other impurities can enter the taps. ● Turn off water supply before commencing work. ● Please read these instructions carefully and keep for future reference.
PAGE 2
Dimensions Unit:inches 3.5″ 6.0″ 2.0″ max1.1″ 4.3″ Installation HANDLE CAP Faucet ALLEN KEY GRUB SCREW CARTRIDGE COVER RETAINING NUT CARTRIDGE Thread Pipe Supply Lines FAUCET O-ring To remove the cartridge. Fixing Nut First shut off the water supply to the tap. 1: Pull out the cap from the handle. 2: Loosen the grub screw in handle, but do not remove it. 3: Take off the handle, unscrew the cartridge cover. 4: Unscrew the retaining nut.