Installation Guide

Longest Cord- Insert the knotted end into the bracket across from Eye Screw 2. Run the cord down the
screen, then back up to Eye Screw 2. Run the cord through Eye Screw 2 and the remaining eyelets, and
down to the cleat.
Mid-length Cord- (This will be the second longest cord in a large kit) Insert the knotted end into
the bracket across from Eye Screw 1. Run the cord down the screen, then back up to Eye Screw
1. Run the cord through Eye Screw 1 and the remaining eyelets, and down to the cleat.
Mid-length Cord – large kit only- (This will be the next longest cord in a large kit) Insert the
knotted end into the bracket across from Eye Screw 5. Run the cord down the screen, then back
up to Eye Screw 5. Run the cord through Eye Screw 5 and the remaining eyelets, and down to
the cleat.
Shortest Cord- Insert the knotted end into the bracket across from Eye Screw 3. Run the cord
down the screen, then back up to Eye Screw 3. Run the cord through Eye Screw 3 and 4, and
down to the cleat. With the screen pulled all the way down, tie all 3 cords together about 12’’
below the cleat and cut off any excess cord.
For more information on installation and accessories, please visit www.freshairscreens.com.
Visit www.freshairscreens.com/support for warranty information. Terms and Conditions apply.
Consumer Warning: This accessory contains ropes which may pose a strangulation hazard for children. This
accessory is optional and removeable for child-proofing purposes. Consider using alternative models that do not
contain ropes where children are present. Contains small parts. *Never leave children unattended; keep small
parts from children.