Install Instructions

WARNING
A
B
C
D
E
F
G I
Germicidal UV Light Installation Instructions
Blue-Tube UV® Mounting Options
Blue-Tube UV is installed inside the air handling system to reduce
biological contamination for reduced system maintenance and
improved indoor air quality.
2
Installation Notes
Before installing Blue-Tube UV it is necessary to determine
the optimal mounting location inside the air system. First,
look for the area with the heaviest mold growth. Also
consider a location that will allow the germicidal UV
light to shine on the greatest surface area. For enhanced
anti-microbial eect 2 or more lamps can be installed in
dierent parts of the air system.
Some typical mounting locations:
A
Supply-side duct
B
At the blower
C
Across top of coils
D
Coil face
E
Coil "A" plate
F
Return-side duct
3
Air Handler Interior Surface Installation
4
Coil “A” plate Installation
1.
Determine the optimal position
for placement of the UV lamp.
2. Use a utility knife to cut a slit in the insulation
on the interior surface.
3. Place the magnetic “Z” bracket directly on the
metal surface or remove the magnet and hard-
mount the bracket using the self-tapping
screws provided. Use foil tape to close the cut
in the insulation.
4. Use plastic quick-nuts to attach the
UV lamp to the “Z” bracket as shown.
1. Snap the “Z” bracket apart by
bending.
2. Drill a 1” hole in the "A"-plate then
attach the smaller piece of the bracket
using the self-tapping screws.
3. Insert the UV lamp into the hole then
use the plastic quick-nuts to attach
the UV lamp to the “Z” bracket as
shown.
1.
2.
3.
© 2014 Triatomic Environmental, Inc
US patent #7,704,463
TUV-BT-MAN 4.24.14
1
Parts Included
A
UV Lamp
B
Power Supply
C
UV Warning Sticker
D
"Z" Mounting Bracket
E
Self-Tapping Screws
F
Sight Glass
G
Tap-in Connector
H
Quick-Nut (plastic)
I
Spade Connectors
IMPORTANT!
• Only qualified technicians should install this product*
• Install in accordance with relevant building codes
• Read instructions carefully including safety warnings
2.
3.
4.
A
B
C
D
D
E
F
H
Important: some materials inside the air system (including
lter media, ex duct, wiring etc.) may not be UV light resistant.
Use the optional UV shield (part #TUV-SHIELD-LPC) or cover
the materials with reective tape.
WARNING
PROTECT EYES FROM UV LIGHT
TURN OFF UNIT OR DISCONNECT
BEFORE SERVICING
*Installation of this product by anyone other than licensed HVAC or electrical contractors voids warranty.