Install Instructions

Germicidal UV Light For Ice Machines
Installation Instructions
Fresh-Aire Ice UV fights mold growth and bacteria
in ice making machines. It extends the life of the
ice machine by reducing microbial growth, lowers
maintenance costs by extending the time between
cleanings and results in cleaner, healthier ice.
1
Determine UV Lamp Mounting Location
There are many dierent ice making machines so there is no single “right” Ice UV
mounting location. To determine the best location for your ice maker start by looking for
areas of mold growth and choose a position for the UV lamp that will provide maximum
exposure to that area. Consider using Ice UV Dual (DT) for 600 lb. or larger ice makers.
2
Mount UV Lamp
After the mounting location is determined the UV lamp(s) can be mounted.
First remove the metal shield then mount the shield using self-tapping screws.
Parts Included
A
Ice UV Lamp
B
Lamp Shield
C
Power Supply
D
UV Warning Sticker
E
Mounting Bracket
F
Sight Glass 0.5”
G
Zip Tie Base
H
Zip Tie
I
Plastic Rivets
J
Adhesive Vinyl
K
Self-tapping screws
L
Bolts
M
Locking Nuts
N
Connectors
O
Optional Safety Interlock
IMPORTANT!
• Only qualified technicians should install this product
• Install in accordance with relevant building codes
• Read instructions carefully including safety warnings
WARNING
PROTECT EYES FROM UV LIGHT
TURN OFF UNIT OR DISCONNECT
BEFORE SERVICING
TUV-ICE-MAN 10.3.14
© 2014 Fresh-Aire UV
Fresh-Aire Ice UV
installed in ice machine
Mount on lid between
evaporator and deector
*Mount over ice collection bin
(good second Ice UV lamp location)
*Important! use with optional interlock
switch to prevent UVC exposrure
Install multiple Ice UV kits (combine
single and dual as needed) into larger
ice makers for complete coverage
A
B
C
E
D
K
L
M
H
N
O
J
F
G
I
1. Remove UV lamp from shield 2. Use shield to mark screw holes
3. Mount shield with self-tapping screws 4. Replace lamp onto shield