Install Instructions

Installation
1. Turn o power to the air handler
2. Remove the existing lter from the 1” slot
3. Add foam padding strips (included) to frame as needed to assure a tight t
4. Insert PLP into 1” slot
5. Power the Purity Low Prole (PLP)
A. Use a 110/24 VAC, 40 VA, Class 2 plug-in adapter power supply.
(Part # TUVP-40VA24VAC-WP sold separately)
or
B. Locate the 24 volt AC power source in your HVAC system then connect
the leads of the power cord illustrated in the electrical wiring diagram.
See diagram (Fig. 1)
WARNING: Electrical work should be done by a
qualied electrician or HVAC technician
Collector Pad Replacement
1. Turn o the power on the HVAC system.
2. Open the air handler lter access door.
3. Unplug the 24 volt power-cord and remove the PLP from the lter slot
4. Clean heavy accumulated dust on the outside screen with a vacuum.
5. Open the PLP and remove the old Collector Pad and discard it.
6. Insert new Collector Pad by sliding the electrode into the color tube inside the Pad.
7. Close the Air Cleaner and plug the 24 volt power cord into the power head.
8. Restore HVAC system power.
Note: You may hear a little snapping noise at the beginning. This
is normal because of variations in temperature and humidity. This
noise should cease after a few hours of operation. If the noise
persists, contact your HVAC service company.
Periodical Operation Maintenance
Your collector pad should last 4 to 6 months, depending on the
amount of air pollutants and fan usage. For maximum eective-
ness of the PLP, we recommend that the fan control on the ther-
mostat be in the “ON” position.
WARNING: Failure to change the collector pad on a regular
basis will result in a reduction of air ow through the HVAC
system. This can cause short cycling of your air handler system
and may cause damage to your equipment.
INSTALLATION
& MAINTENANCE
INSTRUCTIONS
IMPORTANT!
• Only qualified technicians should install this product
• Install in accordance with relevant building codes
• Read instructions carefully including safety warnings
TUV-PLP-MAN 022620
Fig. 2 Power Cord
Fig. 1 HVAC Wiring
Fig. 3 Collector Pad Replacement
LIFETIME
WARRANTY
E
X
C
E
P
T
M
E
D
I
A