Submittal (2019)

Ductless Split Systems

Wall-mounted, Single Zone Heat Pump

PURCHASER P.O. # DATE

PROJECT LOCATION

ENGINEER ARCHITECT

SUBMITTED BY FOR APPROVAL FOR REFERENCE

ITEM PLAN DESIGNATION QUANTITY COOLING BTU/H VOLTAGE FRIEDRICH MODEL

Ductless_Wall-mounted_FPHW091_FPHW121_Single_Zone_Heat_Pump_Submittal_2019

Features

• 115V Single Zone Heat Pump

• Precision Inverter

technology (variable

speed compressor)

• Soft start compressor

• BLDC motor

• Highefciencyforlowoperatingcost

• DiamonBlue Advanced Corrosion

Protection

• Auto Clean indoor coil

• Cooling/Heating/Fan/Auto mode

• Surge Cool/Heat

• Naturalairow

• Ultra quiet operation

• Sleep mode

• Auto restart

• Auto changeover

• 24-hour on/off timer

• ENERGY STAR

qualiedmodel

• Hidden display (only visible during

operation)

OPERATION IN EXTREME CONDITIONS

• Lowambientoperationdownto5ºF

(Cooling mode)

• Lowambientoperationdownto-4ºF

(Heating mode)

FRHSR09A1A, FRHSR12A1A

FRHSW09A1A, FRHSW12A1A

WIRELESS

REMOTE CONTROL

PRECISION

PARTS

WARRANTY

COMPRESSOR

WARRANTY

PAGE 1
Ductless Split Systems Wall-mounted, Single Zone Heat Pump PURCHASER P.O.
PAGE 2
SPECIFICATIONS PERFORMANCE RATINGS 115 volt models SYSTEM MODEL NO. FPHW091 FPHW121 INDOOR MODEL FPHSW09A1A FPHSW12A1A OUTDOOR MODEL FPHSR09A1A FPHSR12A1A SPECIFICATIONS CAPACITY COOLING (RATED) Btu 9000 12000 CAPACITY COOLING MIN - MAX Btu 3600-10000 4000-13500 COOLING AMPS 3.1 4.1 HEATING AMPS 3.3 5.
PAGE 3
DIMENSIONAL DRAWINGS INDOOR UNIT / FRHSW09A1A FRHSW09A1A 33 W H 7/8" 3/16" 11 D 8 1/2" 8 1/2" INDOOR UNIT / FRHSW12A1A FRHSW12A1A 33 W H 7/8" 3/16" 11 D Ductless_Wall-mounted_FPHW091_FPHW121_Single_Zone_Heat_Pump_Submittal_2019
PAGE 4
DIMENSIONAL DRAWINGS OUTDOOR UNITS / FRHSR09A1A, FRSHR12A1A Outdoor units: L1 Model L2 (in.) FPHSR09A1A 17 FPHSR12A1A 20 1/16 7/16 L3 (in.) 10 3/8 12 19/32 (in.) 30 9/16 34 7/8 Width Depth Height L4 L5 L6 L7 (in.) (in.) (in.) 19 11 13/32 23 13 (in.
PAGE 5
ACCESSORIES REFRIGERATION LINE SETS* (Required accessory) Kit# T32150 Length (ft.) Liquid Suction 15' 1/4" 3/8" System Model FPHW091 FPHW121 *Insulated line sets are available for all Friedrich split systems in 15 ft. and 35 ft. lengths. Each line set is equipped with flare nuts on both ends. Both liquid and suction lines are insulated. Line sets can be joined together with field supplied double male connectors. Each system requires one line set for each indoor unit installed.