Wi-Fi Operation Manual
Table Of Contents
- INTRODUCTION
- IMPORTANT SAFETY INFORMATION
- PERSONAL INJURY OR DEATH HAZARDS
- FCC Caution
- Kuhl, Kuhl Q, And Wallmaster Controls
- KUHL, KUHL Q, AND WALLMASTER
- Wi-Fi SET UP INSTRUCTIONS
- Wi-Fi TROUBLESHOOTING TIPS
- FA Pro/ FA Premier App Info
- FA Pro, FA Premier Troubleshooting
- Chill Premier/ Unifit App Info
- Chill Premier/ Unifit Registration
- Chill Premier/ Unifit Login
- Chill Premier/ Unifit Troubleshooting
30 PB
AFTER INSTALLING THE FriedrichGo APP ON YOUR MOBILE DEVICE,
YOU MUST THEN ADD YOUR AC UNIT TO BE CONTROLLED BY YOUR
INSTALLED APP. FOLLOW THE DIRECTIONS BELOW:
1.Press the "Add Device" and click the type of product you are connecting to.
There are two setup Modes/Methods to connect the AC unit to the
wireless network.
Setup Modes:
CF Mode-When setting up your AC unit using a Wi-Fi connection using the CF mode, the AC
unit being connected for Wi-Fi operation will automatically search for an available wireless
network and connects automatically when the setup directions are followed. The unit and
device will be synced together afterwards.
(Reminder-The FriedrichGo App only works on 2.4 GHZ networks)
The default set-up mode will be CF mode when first starting the AC unit.
AP Mode- If your AC unit does not connect to the mobile device through the wireless network
using the setup instruction in CF mode, you can connect the mobile device to the AC unit using
the air conditioner s Wi-Fi adapter or "Device hotspot". The AC unit will show as a wireless
network under the mobile devices Wi-Fi connections as "SmartLife -xxxx". You can then
connect the mobile device from the AC unit s hotspot. After the AC unit is turned off/on the
next time you use it, the AC unit will connect to the wireless network the phone is connected to.
'
'
4
FRIEDRICH GO
Chill Premier/ Unit Login
AFTER INSTALLING THE FriedrichGo APP ON YOUR MOBILE DEVICE, YOU MUST THEN ADD YOUR AC UNIT
TO BE CONTROLLED BY YOUR INSTALLED APP. FOLLOW THE DIRECTIONS BELOW:
1. Press the “Add Device” and click the type of product you are connecting to.
There are two setup Modes/Methods to connect the AC unit to the wireless network.
Setup Modes:
CF Mode-When setting up your AC unit using a Wi-Fi connection using the CF mode, the AC unit being connected
for Wi-Fi operation will automatically search for an available wireless network and connects automatically when
the setup directions are followed. The unit and device will be synced together afterwards.
(Reminder-The FriedrichGo App only works on 2.4 GHZ networks)
The default set-up mode will be CF mode when first starting the AC unit.
AP Mode- If your AC unit does not connect to the mobile device through the wireless network using the setup
instruction in CF mode, you can connect the mobile device to the AC unit using the air conditioner s Wi-Fi adapter
or “Device hotspot”. The AC unit will show as a wireless network under the mobile devices Wi-Fi connections as
“SmartLife -xxxx”. You can then connect the mobile device from the AC unit s hotspot. After the AC unit is turned
off/on the next time you use it, the AC unit will connect to the wireless network the phone is connected to.