Floating Air® Series Ductless Split Systems THE EXPERTS IN ROOM AIR CONDITIONING
FLEXIBLE, EASY-TO-INSTALL ZONED COMFORT SOLUTIONS FROM THE LEADER IN ROOM AIR CONDITIONING Whether you're heating and cooling a single room or multiple rooms, you won't find quieter, more energy-efficient solutions than Friedrich ductless split systems. Choose from sleek wall-mounted models, ceiling cassettes that mount flush with the ceiling, and ducted units that install out of sight. RESIDENTIAL APPLICATIONS COMMERCIAL APPLICATIONS WI-FI CONTROL* ANYTIME, ANYWHERE.
ALL OF THE ADVANTAGES OF DUCTLESS SPLIT SYSTEMS AND FRIEDRICH QUALITY Zero duct loss According to the DOE, ducted systems lose an average of 25-40% in performance due to leaks, cracks or disconnections in ductwork. No ductwork means that ductless systems do not experience duct loss, saving energy and money. No dirty air ducts* With a ductless system, there’s no need to clean dirty air ducts that can harbor dust, germs and allergens that are eventually blown into your home or office.
A UNIQUE DESIGN MAKES FRIEDRICH— THE EASIEST DUCTLESS TO INSTALL, CLEAN & SERVICE EXCLUSIVELY ON FLOATING AIR PRO AND PREMIER SERIES The Problem On typical ductless indoor units, accessing the indoor coils is extremely difficult and takes so much time that a thorough cleaning may be next to impossible. Access to piping, wire terminal blocks, the fan and fan components is also a challenge. The Solution: Friedrich FastPro was designed with the HVAC technician in mind.
IN A FEW EASY STEPS You can access the blower wheel assembly and slide it out for full access to the indoor coil Back out electrical panel screws Remove electrical access panels (2) Lock the access panel Unplug the wire harness Remove screws then slide out the blower wheel assembly Complete access to the coils for easy cleaning UNIQUE FEATURES FOR FASTER INSTALLATION AND EASIER SERVICE • Alignment arrows on the Friedrich wall bracket help you mark and drill the hole in the wall accurately, and with
THE CONTRACTOR'S CHOICE FOR DUCTLESS Friedrich has three exceptional lines of ductless with unique features for easy installation. For contractors, this means less time on the job, and the opportunity to provide your customer with maintenance agreements on equipment that is cleaning and service friendly.
FEATURE COMPARISON A feature-by-feature comparision to help you select the best ductless system for your application.
PREMIER SERIES | DUCTLESS SPLIT SYSTEMS SINGLE ZONE • WALL-MOUNTED HEAT PUMPS Top cooling and heating performance in extreme climates. 28.
PREMIER SERIES SPECIFICATIONS PERFORMANCE RATINGS Single Zone Wall-Mounted - Heat Pumps 9k 12k SYSTEM MODEL NO.
PRO SERIES | DUCTLESS SPLIT SYSTEMS SINGLE ZONE • WALL-MOUNTED HEAT PUMPS The contractor’s line with extensive features to make installation and service faster and easier. Exceptional efficiency and dependable performance.
PRO SERIES SPECIFICATIONS PERFORMANCE RATINGS 115 volt models SYSTEM MODEL NO.
PRO SERIES | DUCTLESS SPLIT SYSTEMS SINGLE ZONE • WALL-MOUNTED HEAT PUMPS The contractor’s line with extensive features to make installation and service faster and easier. Exceptional efficiency and dependable performance. Features for comfort and convenience • Create customizable, 7-day schedules FPHFW18A3A, FPHFW24A3A, FPHFW18A3B, FPHFW24A3B • Precision Inverter® technology (variable speed compressor) • Fast Pro® design for the fastest access for maintenance of any wall-mounted ductless.
PRO SERIES SPECIFICATIONS PERFORMANCE RATINGS 230/208 volt models SYSTEM MODEL NO.
PRO SERIES | DUCTLESS SPLIT SYSTEMS SINGLE ZONE • CEILING CASSETTE HEAT PUMPS Compact cassette units install in a drop ceiling and mount flush to the ceiling for a clean look and efficient installation.
PRO SERIES SPECIFICATIONS PERFORMANCE RATINGS Single Zone Cassette - Heat Pumps SYSTEM MODEL NO.
PRO SERIES | DUCTLESS SPLIT SYSTEMS SINGLE ZONE • THE INSIDER® CONCEALED DUCTED HEAT PUMPS Indoor unit is installed in the ceiling or furr down, totally concealed, for unobtrusive installation. Features • Precision Inverter® technology (variable speed compressor) • Soft start compressor • BLDC motor • Cooling/Heating/Fan mode • Dry mode • 3 fan speeds • Auto restart • Auto changeover • DiamonGold Advanced Corrosion Protection™ • Control lock function on controller • External Static Pressure Range 0-.
PRO SERIES SPECIFICATIONS PERFORMANCE RATINGS Single Zone - The Insider® Concealed Ducted Heat Pumps SYSTEM MODEL NO.
PRO SERIES | DUCTLESS SPLIT SYSTEMS Friedrich multi zone systems utilize wall-mounted, ceiling cassette and concealed ducted models in up to 4 zones MULTI ZONE SYSTEMS PROVIDE TOTAL INSTALLATION FLEXIBILITY. Zone cooling and heating provides unmatched customized comfort and energy savings Occupants have the ability to set the temperature of each zone to their preferred comfort level*, or turn off units in unoccupied rooms without affecting other zones.
MULTI ZONE CONFIGURATION GUIDELINES Select a combination of indoor units that does not exceed the maximum connected capacity, and is within the recommended parameters: CEILING CASSETTE 9,000 12,000 18,000 24,000 WALL-MOUNTED 7,000 9,000 12,000 18,000 24,000 THE INSIDER® 9,000 12,000 18,000 24,000 FPHMR18A3A 24,000 Btu MAX. FPHMR24A3A 33,000 Btu MAX. FPHMR36A3A 48,000 Btu MAX. CONNECTED CAPACITY DUAL-ZONE ONLY CONNECTED CAPACITY TRI-ZONE MAX. CONNECTED CAPACITY TRI-ZONE / FOUR ZONE ONLY.
PRO SERIES | DUCTLESS SPLIT SYSTEMS MULTI ZONE HEAT PUMP SYSTEMS The contractor’s line with extensive features to make installation and service faster and easier. Exceptional efficiency and dependable performance.
PRO SERIES SPECIFICATIONS PERFORMANCE RATINGS Multi Zone Wall-Mounted - Heat Pumps INDOOR MODEL 7k 9k 12k 18k 24k FPHMW07A3A FPHMW07A3B Wi-Fi FPHFW09A3A FPHFW09A3B Wi-Fi FPHFW12A3A FPHFW12A3B Wi-Fi FPHFW18A3A FPHFW18A3B Wi-Fi FPHFW24A3A FPHFW24A3B Wi-Fi SPECIFICATIONS CAPACITY COOLING (RATED) Btu 7000 9000 12000 18000 24000 CAPACITY HEATING (RATED) Btu 8500 9500 13000 19000 24200 Pts/h 2.5 2.5 3.2 4.2 5.
PRO SERIES | DUCTLESS SPLIT SYSTEMS MULTI ZONE • CEILING CASSETTE HEAT PUMPS Compact cassette units install in a drop ceiling and mount flush to the ceiling for a clean look and efficient installation.
PRO SERIES SPECIFICATIONS PERFORMANCE RATINGS Multi Zone Cassette - Heat Pumps 9k INDOOR MODEL SPECIFICATIONS CAPACITY COOLING (RATED) Btu CAPACITY HEATING (RATED) Btu MOISTURE REMOVAL Pts/h AIRFLOW (HIGH) CFM SOUND RATING (MAX.-MIN.) dB-A ELECTRICAL DATA POWER SOURCE V-Hz-Phase POWER AND COMMUNICATION CABLE No. x AWG REFRIGERATION SYSTEM CONNECTIONS LIQUID LINE O.D. in SUCTION LINE O.D.
PRO SERIES | DUCTLESS SPLIT SYSTEMS MULTI ZONE • THE INSIDER® CONCEALED DUCTED HEAT PUMPS Indoor unit installs in the ceiling or furr down for unobtrusive installation. Conditioned or non-conditioned air can be added to ducting to allow fresh air into the conditioned space whenever required.
PRO SERIES SPECIFICATIONS PERFORMANCE RATINGS INDOOR MODEL SPECIFICATIONS CAPACITY COOLING (RATED) CAPACITY HEATING (RATED) MOISTURE REMOVAL AIRFLOW SOUND RATING (MAX.-MIN.) ELECTRICAL DATA POWER SOURCE POWER AND COMMUNICATION CABLE REFRIGERATION SYSTEM CONNECTIONS LIQUID LINE O.D. SUCTION LINE O.D. DIMENSIONS & WEIGHT WXHXD NET WEIGHT SHIPPING WEIGHT Multi Zone - The Insider® Concealed Ducted Heat Pumps 9k FPHFD09A3A 12k FPHFD12A3A 18k FPHFD18A3A 24k FPHFD24A3A Btu Btu Pts/h CFM dB-A 9000 9000 2.
SELECT SERIES | DUCTLESS SPLIT SYSTEMS SINGLE ZONE • WALL-MOUNTED HEAT PUMPS Excellent efficiency and outstanding quality make Select a truly exceptional value line Features • Inverter technology is more energy efficient and can self-adjust capacity to match cooling needs • Multiple operating modes including: auto, cool, dry, fan only and heat 115 VOLT MODELS FSHSW09A1A, FSHSW12A1A • TURBO mode operates the unit at maximum performance to quickly bring the room to set temperature 230/208 VOLT MODELS • 4
SELECT SERIES SPECIFICATIONS PERFORMANCE RATINGS 115 volt models 230/208 volt models FSHW091 FSHW121 FSHW183 FSHW243 FSHW363 INDOOR MODEL FSHSW09A1A FSHSW12A1A FSHSW18A3A FSHSW24A3A FSHSW36A3A OUTDOOR MODEL FSHSR09A1A FSHSR12A1A FSHSR18A3A FSHSR24A3A FSHSR36A3A SYSTEM MODEL NO.
ACCESSORIES REFRIGERATION LINE SETS (REQUIRED) OUTSIDE DIMENSIONS REFRIGERATION LINE SETS MIN./MAX. LENGTHS Floating Air ® Pro Wall-mounted Floating Air ® Pro Wall-mounted Liquid Suction 15’ Lineset Kit 35’ Lineset Kit Min. (ft.) Max. Each/Total (ft.