Wi-Fi Operation Manual (2020, 2021, 2022)

9 PB
Wi-Fi SET UP INSTRUCTIONS (CONT)
6. To start the setup process click the menu button on the Control Panel.
NOTE: If the Display is not illuminated, you will need to need click the menu button to
illuminate the Display and then click it again to start the setup process.
7. Using the up and down arrows, navigate to the CnCT screen.
MENU RETURN
Step 8 (Begin the Setup Process)
MENU RETURN
Steps 7 (Get to the CnCT Screen)
8. Click the menu button, this will begin the setup process for your Friedrich Connect enabled
device.
NOTE: When the setup process starts, the WI-FI symbol will begin to ash. This indicates
the A/C unit is trying to connect to your Wi-Fi network
NOTE: Once the setup process has been started, you will have ve minutes to complete the
setup. If the setup can not be completed in ve minutes the system will rest and you will need to
restart the process.
9. After the Wi-Fi symbol starts blinking, click the “Next”
button on your mobile device.
NOTE: If the Wi-Fi setup is not completed on the
rst attempt, you may need to reset the Air Conditioning
control unit. To accomplish this, turn the unit off, and
unplug the Air Conditioning unit for a minimum of
15 seconds. Plug the unit back in and start the setup
process over.
Step 9 (Click Next)
FRIEDRICH CONNECT
KUHL, KUHL Q, AND WALLMASTER