Service & Parts Manual (2019, 2020, 2021, 2022)

40 PB
REMOVE AND INSTALL THE CHASSIS
REMOVE AND INSTALL THE CHASSIS
Remove the chassis
1. Remove the EntryGard™ Screws. (Refer to Figure
501)
2. Hold the cabinet stationary then carefully slide the
unit out of the sleeve. Make sure to fully support the
unit. (Refer to Figure 502)
Install the Chassis
1. Carefully team lift the chassis and set it into the
cabinet. (Refer to Figure 501)
2. Slide the chassis into the cabinet
4. Reinstall the EntryGard™ screws.. (Refer to Figure
502)
WARNING
ELECTRIC SHOCK HAZARD
Disconnect power to the unit before
servicing. Failure to follow this warning
could result in serious injury or death.
Figure 502 (Remove Chasis)
Figure 501 (Remove Entry Gard Screws)