Installation Instructions For Use with Kühl and Kühl+ units

Model Kühl Series
92003705_00 (5-10) Friedrich Air Conditioning Co. Page 3 of 4
Post Office Box 1540 / San Antonio, Texas 78295-1540
[phone] / [phone] / www.friedrich.com
Step 2. Decorative front door removal and installation
The decorative front filter access door can be easily removed by utilizing the small screwdriver again.
Open the door completely and observe the hinge pins near the inside bottom left and right corners of
the door. Gently pry the hinge pin to cause it to rotate upward. Once the hinge pin is rotated clear of
the doors’ locking rib it can be removed. Gently pull the hinge pin to the side to remove it from the
door and the decorative front. With the hinges removed the door will be free to be removed from the
unit’s decorative front.
Unpack the new decorative door. New hinge pins are included with the kit and can be used if
needed.
Slide the provided screwdriver
under the hinge and pop upward to
release the hinge pin