DWC1 Thermostat Installation and Operations Manual

24 DWC1 Programmable Thermostat
Owner's instruction
Press button to turn on the
indoor.
1
Press button to select
Dehumidification mode.
The temperature setting can not be
adjusted during operation this mode.
2
Press the button to select
airflow rate feeble → weak →
medium → strong → automatic.
(The initial wind powerfulness of
humidity removal drive is 'weak'.)
3
Press button to turn on the
indoor.
1
Press button to select Fan
Mode.
2
Every time pressing button, you
can select wind flow in order of Very
Low → Low → Medium → High →
Very High.
When running ventilation,
compressor of AHU doesn't work.
3
Standard Operation - Fan Mode
It removes humidity while air-cooling weakly.
It blows the air as it is in the indoor, not the cold wind.
• In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and
cooling mode to remove humidity effectively.
• The menu item of wind powerfulness might not be partially selected according to the product.
• Ventilation drive does not release cool wind but general fan
• Because it releases the wind that has no temperature difference from the room, it functions to
circulate the inside air.
• The menu item of wind powerfulness might not be partially selected according to the product.
Standard Operation - Dehumidification Mode