Installation Manual 24-36YJ

12
ENGLISH
3 Pull back the tubing holder.
4 Remove pipe port cover and positioning
the tubing
* The feature can be changed according to
type of model.
Good case
- Press on the tubing cover and unfold the
tubing to downward slowly. And then bend to
the left side slowly.
Bad case
- Following bending case from right to left di-
rectly may cause damage to the tubing.
* The feature can be changed according to
type of model.
1 Hook the indoor unit onto the upper portion
of the installation plate.( engage the three
hooks at the top of the indoor unit with the
upper edge of the installation plate) Ensure
that the hooks are properly seated on the
installation plate by moving it left and right
Installation of Indoor Unit
CAUTION
Installation Information. For right piping.
Follow the instruction above.
!
Right
Back side view
Tubing holder
Backwards
Left
Pipe Port
1
2
Installation plate