2014 960-914-06 (General SVC)

- 24 -
Only for training and service purposes
6.5 Child Lock Function
It is the function to use preventing children or others from careless using.
TEMP
FAN
SPEED
OPER
MODE
During the operation, when pressing the
button and button for approx. 3 seconds,
the ‘Child Lock’ Function can be used.
-
At the time of initial setting of the ‘Child Lock’,
the ‘CL’ Will be indicated approx. 3 seconds
at the temperature Display section before
resuming to the previous mode.
After the setting of the ‘CL’, if another button
is setup, the button can not be recognized as
the ‘CL’ is indicated at the temperature
display section for approx. 3 seconds.
1
If the ‘CL’ function is wanted to be used
under the operation standby state, press the
button and Button for approx.
3 seconds under the standby mode state and
the system will be the ‘CL’ state.
2
As for the releasing method, when pressing
the Button and button for approx. 3
seconds, the ‘CL’ function can be released.
3
FAN
SPEED
FAN
SPEED
FAN
SPEED
It is the function to use preventing children or others from careless using.
Press button repeatedly until
the is flashing.
1
If moving to 'setup' icon area by using button,
'setup' icon blinks, and child lock function is setup if
pressing button at that time.
2
When cancelling lock function, if moving to 'cancel' icon by pressing
button and then, pressing button, child lock function is
cancelled.
3
Press button to exit.
❈ After setup, it automatically gets out of setup mode if there is no
button input for 25 seconds.
❈ When exiting without pressing set button, the manipulated value is
not reflected.
4