Brochure

7
Durable & Reliable Construction
Stainless steel endplates reduce outdoor coil corrosion.
Galvanized zinc coated steel wall sleeve and steel base pan
undergo an 11-step preparation process, are powder coated with
a polyester nish and cured in an oven for exceptional durability.
Additional heating element bottom plate above an improved
heat shield provides extra thermal protection.
Additional thermistor on the blower scroll outlet regulates
internal temperature.
Factory run-tested units reduce problems in the eld.
Internal diagnostic program can alert maintenance to component
failures or operating problems. Fourteen numeric service error
codes stored in memory facilitate rapid unit diagnostics.
Easy access lters simplify maintenance and extend the life of
the product.
Room freeze protection initiates heat if temperature falls to 40°F
in an unoccupied room.
Random compressor restart protects electrical systems from
overload when power is restored.
Tamper-resistant, anodized stamped aluminum grille
withstands chalking and oxidation.
Break-proof control door design maintains the integrity of the unit.
Indoor coil frost sensor protects the compressor to lengthen the
life of the unit.
Diamonblue Advanced Corrosion Protection
®
protects the
outdoor coil from harsh environments.
Warranty and Support
Industry leading warranty features 2-year full warranty on parts
and labor and 5-year limited warranty.
Nationwide service network and U.S. based Friedrich expert
technical team ensures you get fast, knowledgeable service.
Energy Efficient & Energy Smart
Super-efcient refrigeration design with EERs up to 13.0 and
COP up to 3.6.
Exceptional FriedrichLink
®
energy management thermostats
available (wired & wireless) with integrated occupancy
sensor, ve distinct energy presets and comprehensive remote
management capability.*
Advanced coil design adds more surface area leading to
higher efficiencies.
Thicker steel inner-wall and foam construction decreases
thermal transfer and energy loss.
Energy efcient heat pump models available in our complete line.
Electronic defrost control ensures more run time in efcient
heat pump mode.
Electronic temperature limiting to adjust low/high temperature
range limits for reduced energy usage.
Slinger ring technology in condensate removal system cools the
coil and increases efciency.
Desk control ready to allow hotel owners to control units from a
central location.
Sound Reduction Technology
Two permanently lubricated fan motors for added durability
and reduced sound levels indoors.
Quiet, efcient rotary compressor mounted with vibration
isolators to keep the compressor running smoothly and quietly.
High-density insulation and steel inner wall block outdoor noise.
Tangential blower wheel creates a wide path air ow that
reaches the furthest corner of the guest room more quietly than
conventional fans.
Comfort, Health & IAQ
Dehumidication removes up to 3.1 pints/hour of moisture in
cool mode to improve comfort and reduce the chance of mold and
mildew growth.
Constant Fan mode provides continuous fan operation in cooling
or heating modes to create a steady stream of white noise that
masks sound level changes when the compressor cycles on/off.
Fresh air damper brings in fresh outside air when desired.
Intuitive unit controls are user friendly with easy-to-read
LED display that can show either set-point or actual room
temperature as selected by owner.
Anti-microbial air lters are easy to access and washable.
Instant Heat on heat pump models quickly heats a room to the
desired temperature for increased comfort.
Even-heat monitoring checks room temperature and
automatically adds heat boost if necessary.
Automatic periodic sampling of room temperature to ensure
desired conditions are maintained.
Reversible indoor air louvers to easily change direction
of airow.
Ease of Maintenance & Installation
Modular product design ensures easy access to key components
for cleaning and repairs; including washable, lift-out air lters.
Remote thermostat pop-out wiring module
allows easier wiring and unit change out
without rewiring thermostat.
Standard heat output power cord comes
attached to the unit.
Compact front is designed to preserve
indoor oor space with a depth of 7¾ inches.
Surehold Front Cover System
®
securely
attaches the front each time.
Inner wall service plate provides service
access to tangential blower bearing without
having to open up the entire inner wall.
Unit may be installed ush with the oor.
* Energy management capability requires purchase of additional hardware and service fee.
ZONEAIRE
®
PREMIER FEATURES