Product Profile
13
Accessories
PXAA
New Construction Accessories
PDXWSA
PDXWSEXT18
PDXWSEXT24
PDXWSEXT
WALL SLEEVE Galvanized zinc coated steel is prepared in an 11-step
process, then powder coated with a polyester nish and cured in an
oven for exceptional durability. The wall sleeve is insulated for sound
absorption and thermal efciency, 16" High x 42" Wide x 13 3/4" Deep.
DEEP WALL SLEEVE For walls up to 17 1/2" deep.
DEEP WALL SLEEVE For walls up to 23 1/2" deep.
CUSTOM DEEP WALL SLEEVE One piece extended wall sleeve for walls
from 13 1/4" to 25 1/2" deep are available by special order.
PXSE SLEEVE EXTENSION RETROFIT KIT Galvanized zinc coated steel, 2.4"
sleeve extension attached to the room side of the sleeve to allow for the
installation of a PD-Series Friedrich PTAC in a T-Series sleeve.
PXGA GRILLE Standard, stamped aluminium, anodized to resist chalking and
oxidation.
PXAA
PXBG
PXSC
ARCHITECTURAL GRILLES Consist of heavy-gauge 6063-T5
aluminum alloy: 42" W x 16" H x 1.125" D
PXAA – Clear, extruded aluminum
PXBG – Beige acrylic enamel
PXSC – Also available in custom colors.
PXDR10 CONDENSATE DRAIN KIT Attaches to the bottom of the wall sleeve for
internal draining of condensate or to the rear wall sleeve ange for ex-
ternal draining. Recommended on all units to remove excess conden-
sate. Packaged in quantities of ten.
POWER CORDS
Plug Face
PXPC23015A LCDI 230V 15A Cord - 2.5 kW 6-15
PXPC23020A LCDI 230V 20A Cord - 3.5 kW 6-20
PXPC23030 LCDI 230V 30A Cord - 5.0 kW 6-30
PXPC26515A Non-LCDI 265V 15A Cord - 2.5 kW 7-15
PXPC26520A Non-LCDI 265V 20A Cord - 3.5 kW 7-20
PXPC26530 Non-LCDI 265V 30A Cord - 5.0 kW 7-30
PXCJA CONDUIT KIT WITH JUNCTION BOX Hard wire conduit kit with junc-
tion box for 208/230V and 265V units (subbase not required).
Kit includes a means of quick disconnect for easy removal of the
chassis. *Required for 265V installations.
PXFTA REPLACEMENT FILTER PACK These are original equipment return air
lters. They are reusable and can be cleaned by vacuuming, washing,
or blowing out, and are sold in convenient ten-packs. (Two lters per
chassis).
PXGA
Deep wall sleeve PDXWSEXT18 shown with weather panel
PDXWS