Product Profile

14
Accessories
New Construction Accessories
PDXDAA LATERAL DUCT ADAPTER Attaches to the Friedrich PTAC/PTHP unit
to direct up to 35% of the total airow to a second room. The unit-
mounted duct plenum features a front-mounted aluminum grille that
has two positions to provide the most optimal air direction. The air may
be directed to either the left or the right of the unit through the supplied
3.5 H" x 7 W" x 47" L plenum. Plenum may be cut to length by the in-
staller. Kit includes duct plenum, front grille, 47" duct extension, duct
discharge grille, duct end cap and all necessary mounting hardware.
PDXDEA LATERAL DUCT EXTENSION Additional 3.5 H" x 7" W x 47" L plenum
for use with the LATERAL DUCT ADAPTER. A maximum of 3 duct
extensions total may be used. Note: Ducted airow is reduced as duct
length is increased.
PXSBA DECORATIVE SUBBASE Provides unit support for walls less than six
inches thick. Includes leveling legs, side filler panels and mount-
ing brackets for electrical accessories. Accepts circuit breaker,
power disconnect switch, or conduit kit.
PXSB ELECTRICAL SUBBASE Provides unit support for walls less than six
inches thick. Includes leveling legs, side ller panels, mounting brack-
ets, a plug-in receptacle and field-wiring access. The subbase
also includes electrical knockouts for a power disconnect switch or
circuit breaker.
PXSB23020 Electrical Subbase - 230V 20A
PXSB23030 Electrical Subbase - 230V 30A
PXSB26515 Electrical Subbase - 265V 15A
PXSB26520 Electrical Subbase - 265V 20A
PXSB26530 Electrical Subbase - 265V 30A
RT6 DIGITAL REMOTE THERMOSTAT Single stage cool, single stage heat
for PDE models or single stage cool, dual stage heat for PDH model
thermostat features high/low fan speed switch. Thermostat is hard
wired and can be battery powered or unit powered. Features back-
lit display and multiple conguration modes. For use on PD-series
Friedrich PTACs and Vert-I-Paks.
WRT1 WIRELESS DIGITAL REMOTE THERMOSTAT Single stage cool, single
stage heat for PDE models or single stage cool, dual stage heat for
PDH model thermostat features high/low fan speed switch. Thermo-
stat is wireless and is battery powered. Features backlit display and
multiple conguration modes. For use on PD-series Friedrich PTACs
and Vert-I-Paks.
PDXRTA REMOTE THERMOSTAT ESCUTCHEON KIT This kit contains ten es-
cutcheons that can be placed over the factory control buttons when a
remote wall mounted thermostat is used. The escutcheon directs the
guest to the wall thermostat for operation and retains the LED window
to display error codes and diagnostic information.
EMRT1
EMWRT1
FRIEDRICHLINK® ENERGY MANAGEMENT THERMOSTAT Integrated
occupancy sensor uses a combination of motion and thermal sensing
technologies for accurate occupancy detection. Reliable occupancy
detection allows saving energy when rooms are unoccupied. Energy
saving presets eliminate the guesswork and make it easy to adjust the
energy saving settings.
EMRT1 - Wired thermostat with occupancy sensor.
EMWRT1 - Wireless thermostat with occupancy sensor.
EMOCT Online connection kit.
EMRAF Remote access fee.