Installation Manual EMOCT Online Connection Kit
Provisioning the Server MAC Address BEFORE YOU BEGIN, CONTACT THE PROPERTY IT DEPARTMENT OR THE PROPERTY ISP TO “WHITE-LIST” THE SERVER MAC ADDRESS TO ALLOW UNHINDERED CONNECTION TO THE INTERNET. THE SERVER MAC ADDRESS IS PRINTED ON THE SERVER. The server requires a live ethernet port for MAC address printed on the server with DHCP and the ability to connect outward via TCP to a remote machine.
Installing the Online Connection Kit BEFORE YOU BEGIN, DETERMINE THAT THE SERVER INSTALLATION LOCATION IS SUITABLE. THE SERVER SHOULD BE INSTALLED IN A CLOSE PROXIMITY OF THERMOSTATS. THE ACTUAL DISTANCE WILL VARY DEPENDING ON THE TYPE OF THE BUILDING CONSTRUCTION. DO NOT INSTALL IN A BASEMENT ROOM. DO NOT INSTALL CLOSE TO LARGE METAL STRUCTURES I.E. ELEVATOR SHAFTS. 1. Installing the Server 1.1 Connect the Server to the LAN port with the supplied RJ-45 cable; 1.2.
2. Installing the Wireless Receiver 2.1. Screw the Antenna onto the Wireless Receiver; 2.2. Connect the Wireless Receiver to the Server using the supplied USB cable; 2.3.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. COVERED BY ONE OR MORE OF THE FOLLOWING PATENTS.
Friedrich Air Conditioning Co. 10001 Reunion Place, Suite 500 • San Antonio, Texas 78216 (210) 546-0500 www.friedrich.com Printed in the U.S.A.