Accessory EMOCT Manual (2020)
2
Provisioning the Server MAC Address
BEFORE YOU BEGIN, CONTACT THE PROPERTY IT DEPARTMENT OR THE PROPERTY ISP TO “WHITE-LIST” THE
SERVER MAC ADDRESS TO ALLOW UNHINDERED CONNECTION TO THE INTERNET. THE SERVER MAC ADDRESS IS
PRINTED ON THE SERVER.
The server requires a live ethernet port for MAC address printed on the server with DHCP and the ability to connect outward
via TCP to a remote machine.
The hotel server requires the following to function correctly:
• Wired (ethernet) local connection with either 10 Mbps or 100 Mbps speed. Pure 1Gbps networks will not work.
• DHCP service on that local conncetion. It requires an IP address and a name-server from the local DHCP server.
• DNS to nd time synchronization servers at pool.ntp.org.
• Stateful UDP handling for NTP updates. Standard on all commercial rewall appliances and a normal rewall rule
in most Linux or BSD-based rewalls.
Outbound TCP from the hotel server to a remote TCP port 443 for the SSL connection and TCP port 22 for SSH tunnel to the
web server. Web server endpoint IP addresses may change from time to time.
NOTES
• No specic ports need to be forwarded.
• All communications to the web servers are encrypted. Only NTP is done over a non-encrypted channel.
• Other than the NTP updates, there are no inbound connections of any kind.
For EMOCT, online connection kit, installation support, or to schedule remote management
training session, please contact Verdant Tech Support at 1-888-440-0991.