Accessory EMOCT Manual (2020)

3
Installing the Online Connection Kit
BEFORE YOU BEGIN, DETERMINE THAT THE SERVER INSTALLATION LOCATION IS SUITABLE.
THE SERVER SHOULD BE INSTALLED IN A CLOSE PROXIMITY OF THERMOSTATS. THE ACTUAL DISTANCE WILL VARY
DEPENDING ON THE TYPE OF THE BUILDING CONSTRUCTION.
DO NOT INSTALL IN A BASEMENT ROOM.
DO NOT INSTALL CLOSE TO LARGE METAL STRUCTURES I.E. ELEVATOR SHAFTS.
1. Installing the Server
1.1 Connect the Server to the LAN port with the supplied RJ-45 cable;
1.2. Plug the Server into an electrical outlet with the supplied power cord;
It is strongly advised to plug the server into a UPS.
DO NOT TURN ON THE SERVER YET.
For EMOCT, online connection kit, installation support, or to schedule remote management
training session, please contact Verdant Tech Support at 1-888-440-0991.