Accessory EMRT2 Manual (2020)

05 – INCIDENTAL OCCUPANCY THRESHOLD

00-60 (05* default setting) Select the minimum period of time (in

minutes) for which occupancy needs to be detected to enter the guest

occupancy mode.

When occupancy is detected, thermostat will switch to occupied

mode for a duration of “Incidental Occupancy Threshold” selected

here.

If occupancy is detected for a period of time shorter than the

“Incidental Occupancy Threshold” selected here, the thermostat will

automatically revert to unoccupied mode at the end of the “Incidental

Occupancy Threshold” period and continue to observe energy saving

functions that were in effect before the room became occupied. This

setting allows ignoring incidental room visits.

If occupancy is detected for a period of time longer than the

“Incidental Occupancy Threshold” selected here, the thermostat will

enter the guest occupancy mode. When the thermostat is in the guest

occupancy mode, it will revert to unoccupied mode and initiate the

setback temperature only when occupancy is not detected for the

duration of the setback delay (Heat or Cool) period.

Custom Energy Savings Settings