Accessory EMRT2 Manual (2020)

CONFIGURATION BUTTON

NOTE: You can access Thermostat

Conﬁ guration settings at any time by

pressing the “Conﬁ guration” button.

Thermostat Con guration

Once the thermostat is powered, thermostat con guration settings will appear on

the thermostat screen.

In order to properly operate the PTAC/Vert-I-Pak unit:

➤ Set the thermostat clock;

➤ Enter the room number;

➤ Con gure the equipment settings;

➤ Select Energy Savings Preset;

The thermostat con guration screens have a 3-minute time-out. If no action is

taken within three (3) minutes, the thermostat will exit con guration settings.