Manual

920-087-04 (8-05)
FriedrichPTACAccessories
MODELNUMBER DESCRIPTION PHOTO
PDXWS
PXGA
PXAA
PXDB
PXSC
PXDR10
PXWE
PXSB
RT2
PDXRT
WALL SLEEVE zinc coated steel is prepared in an eleven-step
process, then powder coated with a polyester finish and cured
in an oven for exceptional durability. The wall sleeve is insulated
for sound absorption and thermal efficiency.
16" High x 42" Wide x 13¾" Deep.
GRILLE standard, stamped aluminium, anodized to resist
chalking and oxidation.
ARCHITECTURAL GRILLES Consist of heavy-gauge
6063-T5 aluminum alloy:
PXAA- Clear, extruded aluminum
PXDB- Dark bronze acrylic enamel
PXSC- Also available in custom colors.
CONDENSATE DRAIN KIT Attaches tothe bottom of the wall
sleevefor internaldrainingof condensate orto the rearwallsleeve
flange for externaldraining. Recommended on allunits to remove
excess condensate. Packaged in quantities of ten.
DEEP WALL SLEEVE EXTENSION Afour inchdeep anodized
aluminiumextension thatattachesto the outsideof thewall sleeve
when the wall is greater than eleven inches thick (9½" when a
subbase is used, 10 inches when a lateral duct is used).
DECORATIVE SUBBASE Provides unit support for walls less
than six inches thick. Includes leveling legs, side filler panels
and mounting brackets for electrical accessories. Accepts
circuit breaker, power disconnect switch, or conduit kit.
DIGITAL REMOTE THERMOSTAT Digital electronic
thermostat with "one touch" adjustment. Mounts to wall for
control of unit.
PDXRT - REMOTE THERMOSTAT ESCUTCHEON KIT
This kit contains 10 escutcheons that can be placed over
the factory control buttons when a remote wall mounted
thermostat is used. The escutcheon directs the guest to the
wall thermostat for operation and retains the LED window to
display error codes and diagnostic information.
PDXWS
PXDB
PXDR10
PXWE
PXS_
RT2
PDXRT
25