Brochure

14 | FRIEDRICH PTACs
FRIEDRICH PTAC OPTIONAL ACCESSORIES
WALL SLEEVE PDXWSA
Galvanized steel is prepared in a multi-step process for stronger paint adhesion,
then powder coated with a polyester finish and cured in an oven for exceptional
durability. The wall sleeve is insulated for thermal efciency and noise reduction.
SLEEVE DIMENSIONS: 16" H x 42" W x 13
3
/4" D
CUT OUT DIMENSIONS: 16
1
/4" H x 42
1
/4" W
FRONT COVER DIMENSIONS: 16" H x 42" W x 7
3
/4" D
DEEP WALL SLEEVES
PDXWSEXT18 PDXWSEXT24
For walls up to 17
1
/2” deep. For walls up to 23
1
/2” deep.
PDXWSEXT (Custom depth wall sleeve)
One-piece, extended wall sleeve with built-in bafe for walls from 13
1
/4" to 25
1
/2"
deep are available by special order.
SLEEVE EXTENSION RETROFIT KIT PXSE
2
1
/4" sleeve extension attached to the room side of the sleeve to allow for the
installation of a PD-series Friedrich PTAC in an 11
1
/2" deep T-series sleeve.
INTELLIGENT WALL CONTROLLER* (PREFERRED FRESHAIRE MODEL CONTROLS)
VRPXEMRT2
Wired thermostat with occupancy sensor designed for FreshAire control.
Built-in RH control to maximize FreshAire capabilities. Used with EMOCT for HVAC
energy management
EMWRT2
Wired thermostat with occupancy sensor. Built in RH control to maximize FreshAire
capabilities. Used with EMOCT for HVAC energy management
PFAXWC1
Wired, wall-mounted, 12v controller, non-programmable
DIGITAL REMOTE THERMOSTAT
RT7P
24v, Wired (7 Std), single stage, wall-mounted, 7-day programmable thermostat,
three fan speeds (auto/low/high), and an easy-to-read large backlight display.
RT7
24v, Wired (7 Std), non-programmable, wall-mounted thermostat (unit powered
capable). three fan speeds (auto/low/high), and an easy-to-read backlight display.
WRT2
Wireless wall-mounted thermostat (battery powered). Wireless transmitter (24v),
7-day programmable, three fan speeds (auto/low/high), and an easy to read large
backlight display.
FRIEDRICHLINK
®
ENERGY MANAGEMENT THERMOSTATS
EMRT2 EMWRT2
Wired thermostat with occupancy sensor. Wireless thermostat with occupancy sensor.
EMOCT EMRAF
Online connection kit for Energy Management Remote access fee.
EMRHCF
Remote humidity control fee.
REMOTE THERMOSTAT ESCUTCHEON KIT PDXRTB
Kit contains escutcheons that can be placed over the factory control buttons
(recommended when a remote wall mounted thermostat is used as controls become
inoperable). The escutcheon directs the user to the wall thermostat for operation and
retains the LED window to display error codes and diagnostic information. 10 pack.
CONDUIT KIT /JUNCTION BOX PXCJA
Hard wire conduit kit with junction box for 208/230V and 265V units (subbase not
required). Kit includes a means of quick disconnect for easy removal of the chassis.
Deep wall sleeve extension PDXWSEXT18 shown with
weather panel in place
PDXWSA
PXSE
PDXRTB
PXCJA
*NOTE: The FreshAire PTAC must be paired with wall controller VRPXEMRT2 or PFAXWC1 to operate as a fully variable speed unit.
When used with other compatible thermostats, the unit will operate at multiple speeds in either cooling or heating mode.
EMWRT2, EMRT2, VRPXEMRT2 EMOCT
RT7 WRT2
PFAXWC1 RT7P