Brochure (2021)
Table Of Contents
15
FRIEDRICH PTAC OPTIONAL ACCESSORIES
WALL SLEEVE PDXWSA
Galvanized steel is prepared in a multi-step process for stronger paint
adhesion, then powder coated with a polyester nish and cured in an oven
for exceptional durability. The wall sleeve is insulated for thermal efciency
and noise reduction.
SLEEVE DIMENSIONS: 16" H x 42" W x 13
3
/4" D
CUT OUT DIMENSIONS: 16
1
/4" H x 42
1
/4" W
FRONT COVER DIMENSIONS: 16" H x 42" W x 7
3
/4" D
DEEP WALL SLEEVES
PDXWSEXT18 PDXWSEXT24
For walls up to 17
1
/2” deep. For walls up to 23
1
/2” deep.
PDXWSEXT (Custom depth wall sleeve)
One-piece, extended wall sleeve with built-in bafe for walls from 13
1
/4"
to 25
1
/2" deep are available by special order.
STANDARD GRILLE PXGA
Standard, stamped, anodized aluminum to resist chalking and oxidation.
ARCHITECTURAL GRILLES
Architectural grilles consist of heavy gauge 6063-T5 aluminum alloy.
PXAA Clear extruded aluminum.
PXBG Beige acrylic enamel.
PXSC Available in custom colors.
Deep wall sleeve extension PDXWSEXT18 shown with
weather panel in place
PDXWSA
*NOTE: The FreshAire PTAC when paired with 12v wall controller VRPXEMRT2 or VRPXEMWRT2 will operate as a fully variable speed unit.
When used with other compatible 24v thermostats, the unit will operate at multiple speeds in either cooling or heating mode.
PXAAPXGA