Brochure (2021)

6 | FRESHAIRE
®
SERIES PTAC
FreshAire
®
Make-up Air System
Integrated Fresh air manifold effectively conditions outside air
and meets ASHRAE 62.1 standard for IAQ
Dedicated 2-speed fan delivers up to 52 CFM of outside air into
the room.
Merv 8 filter is washable and replaceable.
Doesn't rely on separate refrigeration system like competitor’s units.
Durable Construction
Aluminum endplates reduce outdoor coil corrosion.
Galvanized zinc coated steel wall sleeve and steel base pan
undergo an 11-step preparation process, are powder coated with
a polyester finish and cured in an oven for exceptional durability.
RS-485 communication plug, enables a better balanced
communication signal which allows the FreshAire PTAC to
communicate fully with the VRPXEMRT2 12V wired controller,
and VRPXEMWRT2 12V wireless controller allowing full variable
control of the inverter compressor and brings access to our
feature rich energy management suite of options including room
occupancy.
Factory run-tested units reduce problems in the field.
Internal diagnostic program can alert maintenance to component
failures or operating problems. Fourteen numeric service error
codes stored in memory facilitate rapid unit diagnostics.
Easy access anti-microbial filters simplify maintenance and
extend the life of the product.
Room freeze protection initiates heat if temperature falls to
50°F in an unoccupied room.
Random compressor restart protects electrical systems from
overload when power is restored.
Tamper-resistant, anodized stamped aluminum grille
withstands chalking and oxidation.
Break proof control door design maintains the integrity of the unit.
Indoor coil frost sensor protects the compressor to lengthen the
life of the unit.
DiamonBlue Advanced Corrosion Protection
®
comes standard on
all PTACs for long life in harsh coastal environments. See note on
the next page regarding coastal installation of FreshAire PTACs in
coastal regions.
Energy Efficient & Energy Smart
Precision Inverter
®
variable speed compressor
Delivers EERs up to 12.9 at part load conditions (9000 Btu model
operating at 6462 Btu).
Exceptional FriedrichLink
®
energy management thermostats
available (wired & wireless) with integrated occupancy
sensor, five distinct energy presets and comprehensive remote
management capability.*
Electronic defrost control ensures more run time in efficient
heat pump mode.
Electronic temperature limiting to adjust low/high temperature
range limits for reduced energy usage.
Slinger ring technology in condensate removal system cools the
coil and increases efficiency.
Central desk control ready to allow hotel owners to control units
from a central location.
FreshAire
®
IAQ Ready
FreshAire® IAQ is a suite of indoor air quality (IAQ) accessories for
use with Friedrich Air Conditioners, all with one dedicated purpose
- healthy indoor air. This product includes our patented FreshAir
make-up system and is compatible with FreshAire UV, and FreshAire
Purifier by iWave. See accessories for more details.
Comfort & Health
Dehumidification removes moisture in cool mode to improve comfort
and reduce the chance of mold and mildew growth.
Intuitive unit controls are user friendly with easy-to-read LED
display that can show either set-point or actual room temperature as
selected by owner.
Anti-microbial air filters are easy to access and washable.
Instant Heat heat pump mode quickly heats a room to the desired
temperature for increased comfort.
Automatic periodic sampling of room temperature to ensure
desired conditions are maintained.
Reversible indoor air louvers to easily change direction of
airflow.
Sound Reduction Features
Two permanently lubricated fan motors for added durability and
reduced sound levels indoors.
Quiet, efficient inverter compressor mounted with vibration
isolators to keep the compressor running smoothly and quietly.
High-density insulation and steel inner wall block outdoor noise
Tangential blower wheel creates a wide path air ow that reaches the
furthest corner of the guest room more quietly than conventional fans.
Ease of Maintenance & Installation
Modular product design ensures easy access to key components for
cleaning and repairs, including washable, lift-out air filters.
Surehold Front Cover System
®
securely attaches the front each
time.
May be installed low on the floor.
Warranty and Service
2 year full warranty on parts and labor and 5 year limited warranty.
Nationwide service network and U.S.-based Friedrich expert
technical team ensures you get fast, knowledgeable service.
PARTS & LABOR
WARRANTY
PARTS & LABOR
WARRANTY
LIMITED
WARRANTY
See warranty documentation for full details.
FRESHAIRE
®
PTAC FEATURES
* Energy management capability requires purchase of additional hardware
and activation fee.