Brochure

14 | FRIEDRICH PTACs
WALL SLEEVE PDXWSA
Galvanized steel is prepared in a multi-step process for stronger paint adhesion,
then powder coated with a polyester finish and cured in an oven for exceptional
durability. The wall sleeve is insulated for thermal efciency and noise reduction.
SLEEVE DIMENSIONS: 16" H x 42" W x 13
3
/4" D
CUT OUT DIMENSIONS: 16
1
/4" H x 42
1
/4" W
FRONT COVER DIMENSIONS: 16" H x 42" W x 7
3
/4" D
DEEP WALL SLEEVES
PDXWSEXT18 PDXWSEXT24
For walls up to 17
1
/2” deep. For walls up to 23
1
/2” deep.
PDXWSEXT (Custom depth wall sleeve)
One-piece, extended wall sleeve with built-in bafe for walls from 13
1
/4" to 25
1
/2"
deep are available by special order.
DIGITAL REMOTE THERMOSTAT
RT7P
24v, Wired (7 Std), single stage, wall-mounted, 7-day programmable thermostat,
three fan speeds (auto/low/high), and an easy-to-read large backlight display.
RT7
24v, Wired (7 Std), non-programmable, wall-mounted thermostat (unit powered
capable). three fan speeds (auto/low/high), and an easy-to-read backlight display.
WRT2
Wireless wall-mounted thermostat (battery powered). Wireless transmitter (24v),
7-day programmable, three fan speeds (auto/low/high), and an easy to read large
backlight display.
FRIEDRICHLINK
®
ENERGY MANAGEMENT THERMOSTATS
VRPXEMRT2 VRPXEMWRT2 (FRESHAIRE CONTROLLERS)
VRPXEMRT2 wired wall controller, and VRPXEMWRT2 wireless controller with
occupancy sensor designed for VRP and FreshAire PTAC control. Built-in RH control
to maximize VRP and FreshAire PTAC capabilities. Used with EMOCT for HVAC energy
management
EMWRT2
Wireless thermostat with occupancy sensor. Built in RH control to maximize
FreshAire capabilities. Used with EMOCT for HVAC energy management
EMRT2
Wired thermostat with occupancy sensor.
EMOCT EMRAF
Online connection kit for Energy Management Remote access fee.
EMRHCF
Remote humidity control fee.
REMOTE THERMOSTAT ESCUTCHEON KIT
PDXRTA For use with ZoneAire Premier only (10 pack)
PDXRTB for use with ZoneAire Select and FreshAire PTACs (10 pack)
Kit contains escutcheons that can be placed over the factory control buttons
(recommended when a remote wall mounted thermostat is used as controls become
inoperable). The escutcheon directs the user to the wall thermostat for operation and
retains the LED window to display error codes and diagnostic information. 10 pack.
CONDUIT KIT /JUNCTION BOX PXCJA
Hard wire conduit kit with junction box for 208/230V and 265V units (subbase not
required). Kit includes a means of quick disconnect for easy removal of the chassis.
Deep wall sleeve extension PDXWSEXT18 shown with
weather panel in place
PDXWSA
PDXRTA
PXCJA
*NOTE: The FreshAire PTAC when paired with 12v wall controller VRPXEMRT2 or VRPXEMWRT2 will operate as a fully variable speed unit.
When used with other compatible 24v thermostats, the unit will operate at multiple speeds in either cooling or heating mode.
EMWRT2, EMRT2, EMOCT
VRPXEMRT2, VRPXEMWRT2
WRT2
RT7P RT7
PTAC | ACCESSORIES
PDXRTB