Brochure

9
Durable & Reliable Construction
Stainless steel endplates reduce outdoor coil corrosion.
Galvanized zinc coated steel wall sleeve and steel base pan
undergo an 11-step preparation process, are powder coated
with a polyester finish and cured in an oven for exceptional
durability.
Additional heating element bottom plate above an improved
heat shield provides extra thermal protection.
Additional thermistor on the blower scroll outlet regulates
internal temperature.
Factory run-tested units reduce problems in the field.
Internal diagnostic program can alert maintenance to component
failures or operating problems. Fourteen numeric service error
codes stored in memory facilitate rapid unit diagnostics.
Easy access filters simplify maintenance and extend the life of
the product.
Room freeze protection initiates heat if temperature falls to
40°F in an unoccupied room.
Random compressor restart protects electrical systems from
overload when power is restored.
Tamper-resistant, anodized stamped aluminum grille
withstands chalking and oxidation.
Break-proof control door design maintains the integrity of the unit.
Indoor coil frost sensor protects the compressor to lengthen
the life of the unit.
Diamonblue Advanced Corrosion Protection
®
protects the
outdoor coil from harsh environments.
Warranty and Support
Industry leading warranty features 2-year full warranty on
parts and labor and 5-year limited warranty.
Nationwide service network and U.S. based Friedrich expert
technical team ensures you get fast, knowledgeable service.
Energy Efficient & Energy Smart
Super-efficient refrigeration design with EERs up to 13.0 and
COP up to 3.6.
Exceptional FriedrichLink
®
energy management thermostats
available (wired & wireless) with integrated occupancy
sensor, five distinct energy presets and comprehensive remote
management capability.*
Advanced coil design adds more surface area leading to
higher efficiencies.
Thicker steel inner-wall and foam construction decreases
thermal transfer and energy loss.
Energy efcient heat pump models available in our complete line.
Electronic defrost control ensures more run time in efficient
heat pump mode.
Electronic temperature limiting to adjust low/high temperature
range limits for reduced energy usage.
Slinger ring technology in condensate removal system cools
the coil and increases efficiency.
Desk control ready to allow hotel owners to control units from
a central location.
Sound Reduction Technology
Two permanently lubricated fan motors for added durability
and reduced sound levels indoors.
Quiet, efficient rotary compressor mounted with vibration
isolators to keep the compressor running smoothly and quietly.
High-density insulation and steel inner wall block outdoor noise.
Tangential blower wheel creates a wide path air ow that
reaches the furthest corner of the guest room more quietly than
conventional fans.
FreshAire
®
IAQ Ready
A full complement of Indoor Air Quality Products has been
certified through installation and testing to ensure exceptional
air quality is achieved when FreshAir IAQ accessories are added
Dehumidification removes up to 3.1 pints/hour of moisture in
cool mode to improve comfort and reduce the chance of mold
and mildew growth.
Constant Fan mode provides continuous fan operation in
cooling or heating modes to create a steady stream of white
noise that masks sound level changes when the compressor
cycles on/off.
Fresh air damper brings in fresh outside air when desired.
Intuitive unit controls are user friendly with easy-to-read
LED display that can show either set-point or actual room
temperature as selected by owner.
Anti-microbial air filters are easy to access and washable.
Instant Heat on heat pump models quickly heats a room to the
desired temperature for increased comfort.
Even-heat monitoring checks room temperature and
automatically adds heat boost if necessary.
Automatic periodic sampling of room temperature to ensure
desired conditions are maintained.
Reversible indoor air louvers to easily change direction
of airflow.
Ease of Maintenance &
Installation
Modular product design ensures easy
access to key components for cleaning and
repairs; including washable, lift-out air
filters.
Remote thermostat pop-out wiring module
allows easier wiring and unit change out
without rewiring thermostat.
Standard heat output power cord comes
attached to the unit.
Compact front is designed to preserve indoor floor space with
a depth of 7¾ inches.
Surehold Front Cover System
®
securely attaches the front each
time.
Inner wall service plate provides service access to tangential
blower bearing without having to open up the entire inner wall.
Unit may be installed flush with the floor.
* Energy management capability requires purchase of additional hardware and activation fee.
ZONEAIRE
®
PREMIER FEATURES