Service and Parts Manual (2016, 2017, 2015)

82 PB
ACCESSORIES
30
New Construction Accessories
PDXDAA
LATERAL DUCT ADAPTER Attaches to the Friedrich PTAC/PTHP unit to direct
features a front mounted aluminum grille that has two positions to provide the
most optimal air direction. The air may be directed to either the left or the right of
the unit through the supplied 3.5 H" x 7 W" x 47" L plenum. Plenum may be cut
to length by the installer. Kit includes duct plenum, front grille, 47" duct extension,
duct discharge grille, duct end cap and all necessary mounting hardware.
PDXDEA
LATERAL DUCT EXTENSION Additional 3.5 H" x 7" W x 47" L plenum for use
with the LATERAL D
UCT ADAPTER. A maximum of 3 duct extensions total may
PXFTA
REPLACEMENT FILTER PACK
They are reusable and can be cleaned by vacuuming, washing, or blowing out,
RT6
DIGITAL REMOTE WALL THERMOSTAT Single stage cool, single stage heat
for PDE models or single stage cool, dual stage heat for PDH model thermostat
features high/low fan speed switch. Thermostat is hard wired and can be battery
modes. For use on PD-series Friedrich PTACs and Vert-I-Paks.
WRT1
DIGITAL THERMOSTAT Wireless, single stage, wall-mounted digital thermostat
FRIEDRICHLINK® ENERGY MANAGEMENT THERMOSTAT Integrated oc-
cupancy sensor uses a combination of motion and thermal sensing technologies
for accurate occupancy detection. Reliable occupancy detection allows saving en-
ergy when rooms are unoccupied. Energy saving presets eliminate the guesswork
and make it easy to adjust the energy saving settings.
EMWRT1
Wireless thermostat with occupancy sensor.
EMRT1
Wired thermostat with occupancy sensor.