Installation and Operation Manual (2021)

ManualsBrandsFriedrich ManualsAir ConditionersHazardguard Series Window or Wall Air Conditioner with 23500 Cooling BTU, 385 CFM, 230 Volts, 9.7 EER Corrosion Protection, Hermetically Sealed Compressor, Diamonblue Advanced Corrosion Protection, Corrosion Resistance, UL Listed, Durability & Reliability

1

2

3

4

5

6

7

8

9

Table Of Contents

9

Unpacking The Unit

STEP 1 Cut the packing straps and remove box pulling it up, remove corner-post and protective packing, conserve the berboard

wing board in a safe place, it will be used later.

Figure 2

Figure 3

Figure 4

STEP 2 Remove decorative plastic return air grille to a safe area away from the unit.

STEP 3 Remove the installation hardware, two gaskets from beneath the unit, and place them in a safe area away from the unit.

STEP 4 Remove the chassis retainer by removing the far right screw in the basepan (see Figure 4); save this screw to reattach the

chassis retainer after installation.