Manual

Installation Instructions
How to Install the Unit
,
2.
3.
To prevent vibration and noise, make sure the
unit is installed securely and firmly
Install the unit where the sunlight does not
shine directly on the unit.
The outside of the cabinet must extend
outward for at least 14" and there should be
no obstacles, such as a fence or wall, within
20" from the back of the cabinet because it
will prevent heat radiation of the condenser.
Restriction of outside air will greatly reduce
the cooling efficiency of the air conditioner.
Cooled air
Awning
Heat
radiation
__-
Over 20"
Fence
/
\
f
/
CAUTION: All side louvers of the cabinet must remain exposed to the outside of the structure.
4. Install the unit with a slight downward tilt so the back is slightly lower than the front(about
1/4").
This will force excess condensate to flow to the outside.
5. Install the unit with the bottom about 30" - 60" above the floor level.
Window Requirements
1. These instructions are for a horizontal
sliding or a casement window.
2. The electrical outlet must be within reach of
the power cord.
For installation in a casement window, the
window frame assembly and the side of the
building must be adequate to support the
weight of the air conditioner.
Horizontal sliding window
Casement window