Manual

Installation Instructions
Horizontal Sliding Window Installation
5. Fasten side guides to the sides of the air
conditioner using 3-type A screws per guide.
Start with first screw at middle of guide. (Fig. 4)
6. Fasten upper guide on the top of the air
conditioner using 3-type A screws. (Fig. 4)
7. Measure height of window opening from top of
bracket assembly as shown Fig. 5. Subtract
20-3/4 inches. Mark this measurement on
curtain and cut the curtain. (Fig. 5)
8. Slide curtain into curtain frame. Slide curtain
frame assembly into side guides of the air
conditioner cabinet. Make sure curtain is firmly
enclosed on all sides by the frame.
(Fig. 6)
Fastening Side Guides
Upper
-Side Guide
Fig. 4
Fig. 5
Fig. 6
9. Cut side guide seal into 2 equal lengths.
remove protective backing and apply it to the
rear side of cabinet side guides, starting just
below curtain frame assembly. Pinch off
excess length so seal is even with the bottom
of side guide. (Fig. 7)
'weather seal
to side guides
just below edge of
Curtain Frame.
Fig. 7