Manual

920-075-07(10-03)
II. Installation
1) UtilityClosetDimensions
Recommended utility closet dimensions and a typical indoorinstallation are illustrated inFigure 3.Three inches minimum clearance on
three sides of the unit must be allowed for return airflow, installation access and service access. See Figures 3 and 4 for clearances
and reference dimensions.
Figure3
Typical Utility Closet
25"x 20" Filter
(Field Supplied)
VPRG4 Access Panel and
Return Air Filter Grille
See Figure 8, Page 10
for return air options
Wiring
Power
Disconnect
• Vert-I-Pak Chassis dimensions:
23 _/e"wide x 23 _/_'deep x 32 V4"high.
• VPAWP1-8/1-14 Wall Plenumcut-out
dimensions24 SlY'wide x307/j, high.
• VPRG4 Access Panel cutoutdimensions:
27"wide by 553/4"high.
• See Figure9 (Pg 11)for properchassis
installation.
Optional
Platform
Chassis Shown in Closet, on Optional Platform
Electrical
Connection
Rigid Ductwork
Flexible Ductwork
,VPAWP1-8/1-14
Wall Plenum
Plenum Divider
3/4" FPT Drain
Connection
Chassis installs
23/e'' into Plenum
3" Clearance on all three sides
minimum for service and installation•
Figure4
Top View f
7 tl
•2 wl
f
6t_
5