Brochure

7 | VERT-I-PAK
®
SINGLE PACKAGE VERTICAL AIR CONDITIONERS
ARCHITECTURAL LOUVER
VPAL2 and VPSC2
Extruded aluminum grille that attaches to the outdoor section of the wall plenum.
VPSC2 can be ordered in custom colors.
DIMENSIONS: 25
9
/16" W x 31
1
/16" H
WALL PLENUM (REQUIRED)
VPAWP1-8, VPAWP1-14
Two-part sleeve that telescopes in and out; sits inside the exterior wall penetration.
VPAWP1-8 telescopes from 5
1
/2" – 8"
VPAWP1-14 telescopes from 8" – 14"
DIMENSIONS: 24
1
/8" W x 30
3
/8" H
CUTOUT DIMENSIONS: 24
5
/8 " W x 30
7
/8 " H
RETURN AIR GRILLE/ ACCESS PANEL/SOLID DOOR ACCESS PANEL
VPRG4/ VPRG4R/VPRG4SD
Hinged panel allows access to unit and return air filter.
A field-supplied filter (25" x 20") should be mounted on the inside grille.
Panel can be mounted with return air openings high or low on the door for
optimum sound attenuation. VPRG4SD is a solid door panel. VPRG4 is a
default left in-swing, the VPRG4R is a right in-swing.
DIMENSIONS: 29" W x 58" H
CUTOUT DIMENSIONS: 27" W x 55
3
/4" H
FIRST COMPANY SLEEVE ADAPTER
VPASA1
Single piece, welded adapter allows retrot into existing First Company
®
SPXR-
series single package vertical unit wall sleeve and louver. Easily connects to
Friedrich chassis. Only compatible with Friedrich’s smaller sized VPAK 9k and
12k units.
DRAIN PAN (REQUIRED FOR VHA18 AND VHA24 MODELS)
VPDP2
For VHA18 & VHA24 models. Must be installed prior to chassis for easy
installation/removal.
VPAL2
VPAWP1-8/14
VPRG4/VPRG4R
VPASA1
VPDP2
VPRG4SD
VERTIPAK
®
| ACCESSORIES